The Spin Coater is controlled by touch screen, the acceleration range is 100~ 4000rpm/s, and the speed can be automatically corrected by A/K selection. The motor torque is large and the operation is smooth, which is suitable for the assembly line process.
Glass thickness and air interlayer thickness can be measured at the same time. Glass thickness range is 70mm, air interlayer range is 34mm, light and portable operation is simple.
Using laser reflection principle to achieve one-sided measurement, accuracy of 0.1mm, can simultaneously obtain multi-layer Glass and air layer Film thickness, support automatic and manual mode, adapt to three glass two Chambers, laminated Glass and other materials.
Equipped with a 230 × 380 × 6mm Glass face, the adjustable size range is 275 × 205mm to 275 × 255mm. The bakelite base ensures a stable platform and adapts to different experimental needs.
Glass composite ElectRode and LT Glass sensing film, Measurement range 0-12pH, built-in temperature sensor automatic compensation, small design for micro sample detection, Bluetooth 4.0 technology implementation 10 Meters wireless transmission.
Glass plate with 440 × 180 × 8mm size is used to ensure uniform film surface, chemical corrosion resistance and easy cleaning and maintenance, providing accurate film evaluation results.
440 * 355 * 8mm flat Glass substrate is used to ensure film uniformity; chemical corrosion resistant material is easy to clean and maintain, and clip fixed design ensures Spreader Stability.
The fitting specially designed for hardness Gauges, made of Glass plate, can provide a stable test platform to ensure the accuracy and Repeatability of Hardness measurement results.
Glass transparent material, size 240 * 160 * 8mm, flat surface to ensure uniform film, chemical corrosion resistance and easy to clean and maintain, clip fixed substrate easy to operate.
Transparent Glass material ensures uniform film, size 145 * 110 * 8mm provides accurate evaluation results, chemical corrosion resistance and easy cleaning and maintenance, suitable for a variety of Coating performance tests.
Glass material ensures that the film is flat, used with wire Rod or Film Applicator, the specification size is 110 * 180mm, and the operation is simple and efficient.
High borosilicate Glass material, corrosion resistance and can withstand large thermal Impact, vacuum negative pressure of 0.095MPa, Speed range 50~ 500rpm, suitable for material synthesis and distillation recovery.
Using LT Glass sensing film, built-in temperature sensor, support Bluetooth 4.0 connection, transmission distance of 10 Meters, using CR2032 battery life of about 500 hours, suitable for micro vessel sample measurement.
Using 160 * 280mm size, with wire Rod scraping ink to ensure that the film is flat, Glass table is conducive to operation and observation effect.
Complete the sterilization of small metal Glass appliances within ten seconds, the maximum temperature is 300 ° C, the temperature control accuracy is +/- 5 ° C, and the built-in over-temperature protection device ensures the safe operation.
