35Mm cross-cut length and 1mm pitch design, stainless steel material to ensure dimensional accuracy, equipped with tape and brush for film adhesion testing.
35Mm cross-cut length with 2mm spacing design, 11 teeth to ensure test accuracy, 304 stainless steel material to ensure durability, suitable for film adhesion evaluation.
Set cross-cut adhesion, film thickness and Buchholz Crowd Hardness three test functions in one, cross-cut knife 6 blade spacing 1mm/2mm, Crowd knife load 500 +/- 5g, using the destruction Measurement principle.
Made of stainless steel, the cutter tooth spacing is 1-3mm, the cut mark length is 35mm, and the coating is cut through the grid pattern, and the adhesion effect is evaluated according to the six-level classification, which is suitable for a variety of surface tests.
Made of 304 stainless steel, with a cross-cut length of 23-35mm, it provides four spacings of 1-3mm and 7/11 cross-cut numbers to meet different standard testing requirements.
Vacuum hardened stainless steel material, cutting depth can be accurately adjusted, weight only 352g easy to carry, suitable for different film thickness and substrate adhesion testing.
Equipped with three swirl/spin cutter heads, the tooth spacing is 1mm, 2mm and 3mm respectively, and it is designed according to ISO2409 standard for accurate evaluation of coating adhesion performance.
Manual design, equipped with a 6-tooth cutting knife, with a 1mm and 2mm tooth spacing, in line with ISO2409 standards, suitable for adhesion testing in laboratories and construction sites.
It adopts 11-tooth cutter design, provides four spacing options from 1mm to 3mm, and is suitable for paint film adhesion testing with a thickness of less than 250mm. The operation is simple and the results are accurate and reliable.
35Mm cross-cut length with 11 teeth design, 1.5mm precise spacing to ensure test accuracy, 304 stainless steel material to ensure durability, equipped with tape and nylon brush to complete the complete test process.
35Mm cross-cut length with 6 teeth design, 3mm precise spacing to ensure test accuracy, 304 stainless steel material to ensure durability, equipped with tape and brush complete set.
Tack is good and non-degumming, adhesion reaches 7.6 N/cm, mass performance is stable, suitable for cross-cut adhesion testing, to ensure accurate film integrity assessment.
Measurement range 0~ 500N, accuracy less than +/- 1%, can store 20 sets of results and print reports, humanized fixture supports a variety of substrates.
Sensor and motor imported, Measurement range 0~ 300N, accuracy less than +/- 1%, can store 20 sets of data and automatically calculate the maximum, minimum, average, support a variety of substrate testing.
Hardness High Abrasion Resistance, cutting speed 20-50mm/s, suitable for film thickness 0~ 60μm, Handheld design is convenient for laboratory and field use.
