Multi-blade design is equipped with 6 cutter teeth, 1.5mm equal spacing arrangement, suitable for 50~ 125μm film thickness environment testing, to ensure cross-cutting accuracy in line with international standards.
Made of carbide steel, the number of teeth is 11, and the tooth spacing is 1mm to ensure accurate and even cross-cutting. The winger design improves cutting effect and durability.
Equipped with 1mm and 2mm cutter head spacing, the number of cutter teeth is 11, which can meet the needs of different paint film thickness testing, easy to operate and in line with international standards.
The number of teeth is 11, the spacing is 1mm, and the single-sided simple cutter head design can be used for cross-cutting experiments. Standard two cutter heads are provided for easy operation.
11 tooth cutter design, 2mm pitch, single-sided simple cutter head, can carry out cross-cut experiment, test coating adhesion, in line with a number of international standards.
Tooth pitch of 1mm, 6 teeth design, can accurately draw 25 squares, suitable for 0-60 µm film thickness of strong substrate testing, in line with international standards.
The number of teeth 6, spacing 3mm, using circumferential multi-faceted cutter surface design, long service life, suitable for film thickness greater than 120 μ m hard substrate test cross-cut.
Control system using servo motor, scratch speed 254mm/min, weight free lifting, ensure that the needle parts accurately fall on the workpiece, to achieve automatic scratch and zero operation.
The number of teeth is 6 teeth, the spacing is 2mm, and the multi-cutter surface circumference and multi-faceted design is adopted, which has a long service life and is suitable for 60 to 120μm hard substrate samples.
Wedge cutting method for direct measurement Coating thickness, equipped with 50 times magnification Microscope can read 1/100 grid accuracy, support multi-layer coating system delamination measurement, weight only 400 grams for on-site operation.
11 teeth blade design, 1.5mm isometric cutting, equipped with automatic adjustment of the blade holder to ensure pressure Balance, circular cutter with eight incisions, suitable for 50-125μm film thickness environment test.
Hand crank type is easy to operate, load 1000g +/- 1g, scratch speed about 1mm/s, test angle 45 °, standard 6B-6H pencil, in line with a number of international standards, through the pencil Hardness grade to accurately evaluate the scratch performance of the paint film.
Using electric Dial design, the scratch length can reach 60mm, the load range is 0-2000g, and the physical characteristics of the coating are characterized by the anti-penetration ability of the scribing needle.
The ergonomic handshake design is labor-saving, and the blade can be easily replaced; the top width of the blade is less than 0.05mm, and the included angle is 30 ° +/- 1 ° to ensure accurate and clear scratches and improve test accuracy.
Made of stainless steel, with 6 precision teeth, the spacing is accurate to 1mm, and the cutting edge is kept sharp to ensure the accuracy and Repeatability of the paint film test.
