Made of stainless steel, with 6 cutter teeth, the cutter tooth spacing is 2mm, which can provide a uniform cutting effect and is suitable for paint film adhesion testing.
Made of stainless steel, with 6 cutter tooth designs, with a cutter tooth spacing of 3mm, strong durability and stable cutting effect, suitable for accurate paint film testing requirements.
Using 4mm flow hole and chrome-plated Cup structure, the outflow time range is 0-150 seconds, and the correction factor K = 1 +/- 0.03 ensures accurate and reliable viscosity measurement.
Equipped with 6 teeth 2mm pitch stainless steel cutter head, adjustable cutter head angle, suitable for 61-120μm film thickness test, with nylon brush and 2.5x magnifying glass, to meet a variety of international standards.
Made of stainless steel, the cutter tooth spacing is 1mm, with a total of 11 teeth, ensuring uniform cutting and durability. It is suitable for precision paint film testing.
It adopts 11-tooth cutter design, provides four spacing options from 1mm to 3mm, and is suitable for paint film adhesion testing with a thickness of less than 250mm. The operation is simple and the results are accurate and reliable.
Wire-wound design wet film thickness 9.1 μ m, steel wire diaMeter Φ 0.10mm, chrome-plated surface is easy to clean and prolong life, suitable for a variety of substrates, Spreader uniform and flexible.
Multi-blade design is equipped with 6 cutter teeth, 1.5mm equal spacing arrangement, suitable for 50~ 125μm film thickness environment testing, to ensure cross-cutting accuracy in line with international standards.
Equipped with 1mm and 2mm cutter head spacing, the number of cutter teeth is 11, which can meet the needs of different paint film thickness testing, easy to operate and in line with international standards.
Wedge cutting method for direct measurement Coating thickness, equipped with 50 times magnification Microscope can read 1/100 grid accuracy, support multi-layer coating system delamination measurement, weight only 400 grams for on-site operation.
Adopting 6 cutter face circumference multi-face cutter tooth structure, the service life is significantly improved. The cutter tooth spacing is 1mm, which is suitable for the testing requirements of solid substrates with film thickness below 60μm.
Irreversible discoloration records the highest temperature, accuracy +/- 1 ° C to +/- 4 ° C, four grid temperature points cover 82 ° C to 99 ° C, oil and water vapor resistance, Instant Response for easy monitoring.
Adopting 6 cutter face circumference multi-face cutter tooth design, the service life is significantly extended; the number of cutter teeth is 11, and the spacing is 2mm, which is suitable for hard substrate testing in the range of 60-120μm film thickness.
Equipped with 11 teeth 1mm pitch stainless steel cutter head, suitable for 0-50μm film thickness test, adjustable cutter head angle, with nylon brush and 2.5x magnifying glass, to meet a variety of standard requirements.
Irreversible discoloration records the highest temperature, four grid design covers 49 ° C to 65 ° C, accuracy +/- 1.5 ° C, oil, water, steam resistance, instant Response and easy to paste and store.
