Equipped with 2 15W fluorescent lamps and frosted Glass uniform ray of light, Internal dimensions 500 * 400 * 600mm, to ensure accurate evaluation of coating performance in a non-interference environment.
Equipped with 254nm and 365nm dual-wavelength quartz ultraviolet lamps, which can be used alone or in combination, with 150 * 50mm filters and ordinary fluorescent lamps, the whole machine weighs 6.1kg, and the structure is simple and convenient for maintenance.
Using wooden handle material and high-quality alloy steel blades, the tooth spacing is 2mm, the number of teeth is 6, the top width of the blade is less than 0.05mm, the included angle is 30 ° +/- 1 °, suitable for film Film thickness 61μm~ 120μm hard substrate or Film thickness < 120μm soft substrate, ergonomic design is labor-saving, and the blade can be easily replaced.
Adopt D/8 lighting observation conditions, the measurement diaMeter is Φ 10mm, and the spectral reflectance Repeatability Standard Deviation is within 0.08%. It has camera framing and automatic Gloss compensation technology to ensure measurement accuracy.
The length of the stainless steel blade is 100mm, with a wooden handle, the total length is 200mm, which is rust-proof, durable and comfortable to operate.
Built-in mobile slide table can move the camera front and rear, high display finger no stroboscopic LED Illuminant Color temperature is stable, the illuminance is adjustable, the back plate of the box can post 712mm * 400mm test card to provide a uniform lighting environment.
Equipped with 5 million pixel CMOS camera, supports real-time observation and image recording, magnification 40X-1600X, digitalization imagery and image measurement analysis functions, improve observation flexibility.
Support HDMI, WIFI and SD card three output, 1920 * 1080 resolution, can directly control camera paraMeters through USB mouse, embedded image capture and video recording, suitable for a variety of detection scenes.
Color temperature adjustment range 2300K-8000K, illumination adjustment range 0-4000Lux, built-in mobile slide can move the camera front and rear, light source light board can swirl/spin to adjust the angle, provide a uniform lighting environment.
Using PID temperature control technology to ensure accurate and stable temperature, temperature resolution of 0.1 ℃, support capillary method and hot table method two measurement methods, microscopic camera real-time display of melting process, data can be stored and transmitted.
Adopt high definition camera to observe the measurement process in real time, dual-channel simultaneous detection, adjustable heating rate 0.1-20 ℃/min, support video playback and automatic interpretation of deformation characteristics.
Using high-resolution video camera technology to replace the traditional Microscope, the temperature range is from room temperature to 350 ° C, and 4 samples can be processed simultaneously, compatible with powder and block sample measurement. Temperature resolution reaches 0.1 ° C.
Equipped with a high definition camera module can clearly observe the sample melting process, process 4 samples at a time, Temperature range RT +~ 420 ℃, heating rate 0.1~ 20 ℃ infinitely adjustable, automatic recording of melting distance and initial melting and final melting.
With camera viewing function to prevent measurement deviation, Repeatability Standard Deviation Delta E * ab within 0.05, dual Measurement mode synchronously displays SCI and SCE results, large storage space can store 20,000 data.
Equipped with 5 million pixel CMOS camera, supports real-time observation and image recording, magnification 40X-1600X, digitalization imagery and image measurement analysis functions, improve observation flexibility.
