Hardness stainless steel material, Hardness of 50~ 55HRC, film accuracy +/- 2μm, smooth surface to support a variety of Spreader requirements, can be used with Film Applicator to achieve automatic film operation.
The 4-sided coating Applicator can be prepative of four wet film thicknesses, the conversion angle is easy to operate, the accuracy is +/- 3μm, the stainless steel material is resistant to acid and alkali erosion, and the application width is 80mm.
Using stainless steel material with acid and alkaline resistance, wet film thickness 250μm accuracy of +/- 2μm, suitable for flat and sturdy substrate film operation.
Formed to achieve 52.6 micron precision film, 304 stainless steel material provides high Abrasion Resistance, 50mm at both ends of the hand part without additional handle, can be directly matched with the experimental Film Applicator.
Application width 100mm, wet film thickness 100μm, stainless steel corrosion resistance, ensure that the film is uniform and flat, improve the test Reliability.
Made of DAIDO 440C stainless steel, wet film thickness up to 2000μm, accuracy +/- 2μm, suitable for precision film applications on a variety of substrates.
4-Sided design can be prepared with four film thicknesses of 100μm, 200μm, 300μm and 400μm, application width 80mm, stainless steel material, high accuracy and suitable for water-based, acidic and alkaline pRoducts.
The stainless steel material is resistant to acid and alkali erosion, and can scrape 250-1000 μm of four different thickness wet-film. During operation, only the angle can be changed to obtain different film thicknesses, and the application width is 80mm.
Wear-resistant stainless steel material, wet film thickness 48.0μm, accuracy of 0.1μm, effective application width 30cm, suitable for High Accuracy film experimental needs.
The stainless steel material is corrosion resistant, provides 250μm High Accuracy fixed film thickness, application width 100mm, ensures that the film is uniform and flat, suitable for laboratory sample preparation.
Spreader offers 217.2 micron wet film thickness with formed process and stainless steel to ensure uniformity and long-term durability for thicker film needs.
Stainless steel material to ensure durability, wet film thickness 30-120μm optional, accuracy +/- 2μm, application width 60mm, can be used with Automatic Film Applicator.
Made of stainless steel, acid and alkali erosion resistance; 4-sided design can provide 30/60/90/120μm four film thickness, application width 80mm, operation only need to change the angle to quickly switch film thickness.
Using 304 wear-resistant stainless steel material, wet film thickness 18.3μm, Spreader width 300mm, suitable for a variety of fluid samples of experimental film requirements.
Wet film thickness of 171.5 microns, formed pRoduction process, application width 300mm, stainless steel material to ensure corrosion resistance and film uniformity.
