Adopt hand-crank mechanical pressurization method, Heating power 650W, Mold sleeve specification < 40mm, suitable for small or irregular samples, support thermosetting material inlay.
Hand-crank mechanical pressurization is easy to operate, digital temperature controller to ensure stable temperature, Heating power 440W, mold sleeve specification < 25mm, suitable for thermosetting material inlay, protect the edge of the sample.
Hand type easy to operate, load 1000g, standard 6B-6H pencil, suitable for film hardness testing, test temperature 23 +/- 2 ℃ and Humidity 50 +/- 5% environment.
Sharp probe measurement without leaving marks, measurement range 6%~ 90%, support wood moisture content and wood humidity equivalent value display, equipped with extended Probe and hammer ElectRode for different depth measurement.
Dual thermoMeter design can simultaneously measure wet-bulb temperature, equipped with special conversion ratio calculation tool, Temperature Measurement range covering -5 to 50 ℃, Humidity Measurement range 10-100% RH.
Adopt gear pair drive, hand-pressed operation, rated load 500N, Travel 70mm, the upper and lower height of the frame can be adjusted, Force Gauge has a positioning structure, suitable for batch testing.
Adopt gear pair transmission, hand-pressed operation, the height of the frame can be adjusted up and down, Force Gauge up and down movement is equipped with positioning structure, rated load 500N, Travel 70mm, suitable for batch testing.
Rated load 500N, rack and pinion drive, hand pressure operation is simple and stable, large foot design to ensure smooth measurement process, Travel 75mm, suitable for Force Gauge installation for tensile or plug force test.
Adopt 0-3000rpm stepless speed regulation, Processing capacity 10-100L, with full explosion-proof structure and hand lifting system, suitable for dispersing and mixing of high viscosity materials.
Hand pressure type is easy to operate, the rack and pinion transmission is smooth, the digital display ruler can display the displacement and lock the Travel, the maximum test load is 500N, the measurement Travel is 200mm, and the base is stable and the fuselage is heavy.
With 0.5 Precision and +/- 0.5% FS accuracy, support for peak hold and forward and reverse dual displays, measurement of 100kgf range and buzzer overload alarm for multiple force unit conversions.
Measurement range 0~ 10mm, accuracy ≤ 0.02mm, probe center to the maximum measurement depth 130mm, Dial reading, portable handheld design, suitable for on-site rapid detection.
Measurement range 0-10mm, accuracy ≤ 0.02mm, Graduation 0.001mm, probe diaMeter Φ 20mm plane, portable handheld design, in line with chemical industry standards.
Measurement range 0-1mm, Graduation 0.001mm, probe diaMeter 5mm plane design, portable handheld for rapid measurement in the workshop, in line with industry standards.
Measurement range 0-10mm, accuracy 0.02mm, probe center to the maximum measurement into the depth of 130mm, easy to carry handheld measurement.
