Equipped with 6 cutting tools, covering 0-2000μm Measurement range, support for cross-cut and CROSS testing, built-in Microscope with micron scale for evaluation at 60 ° light.
Using Hall and magnetic eddy current dual principle, Measurement accuracy +/- (1μm + 2% reading), equipped with wear-resistant ruby Probe, support automatic matrix switching and statistical functions, Operating temperature 0~ 50 ℃.
In line with ISO2808-1974 standard, the range is 0~ 150μm, the accuracy is not more than 5μm, can measure the wet film thickness and estimate dry-film thickness, suitable for laboratory and pRoduction control.
Iron-aluminum dual-use automatically recognizes the substrate, the split Probe is interchangeable, and the high wear-resistant cemented carbide Probe has a service life of more than 500,000 times. With zero, single point, five point calibrate and data statistics functions, it can store 1600 measurement data.
In line with ISO2808 standard, the range is 0~ 500μm, the accuracy is not more than 5μm, can measure the wet film thickness and estimate dry-film thickness, suitable for laboratory and pRoduction site.
Measurement range of 0-1250μm using eddy current principle, with single and continuous two measurement modes, support metric imperial unit conversion, with split Probe and RS232C interface, providing Automatic calibration and matrix recognition function.
Set cross-cut adhesion, film thickness and Buchholz Crowd Hardness three test functions in one, cross-cut knife 6 blade spacing 1mm/2mm, Crowd knife load 500 +/- 5g, using the destruction Measurement principle.
Using magnetic Induction and eddy Current dual principle, measurement range 0-2000μm, accuracy +/- 3%, equipped with ruby probe wear and corrosion resistance, support automatic identification of iron-based and non-iron-based materials, no need to calibrate easy to operate.
Measurement range 0-1000 microns with dual-function Probe design, wear-resistant Ruby Probe and V-groove structure, support for automatic substrate identification and zero point Adjustment.
Using magnetic eddy current dual-use principle, Measurement range 0~ 1250 microns, accuracy +/- (1% -3%) H + 1.5μm, with continuous and single Measurement mode, support Data storage and statistical functions, Probe Sensitivity is high, suitable for a variety of matrix materials.
Using the principle of 90 ° scattered light, the dual-range design covers 0~ 20NTU and 0~ 200NTU, with a resolution of 0.01 NTU, supports automatic shutdown and AC and DC power supply, which is convenient for on-site rapid detection.
Temperature uniformity is improved by fan speed control, the independent air duct circulation system automatically discharges water vapor, the dry culture mode is automatically converted, the temperature control accuracy fosters +/- 0.5 ℃, drying +/- 1 ℃, and the double door structure insulation does not affect the temperature in the box.
Adopt fan speed control to improve Temperature uniformity, automatic discharge of water vapor, automatic conversion of dry culture mode, temperature control accuracy of +/- 0.5 ℃, Timer Range 1-9999 minutes.
Made of stainless steel, the thickness is only 1.5mm, the range is 20~ 200μm, Division 20μm, the card design is convenient for quick measurement of wet-film Coating thickness on site.
The three-wheel structure design is adopted, and the center wheel contacts the film directly for reading. The measuring range is 0-500 μm and the indexing is 25 μm. It can perform nondestructive thickness measurement on plane and curved surface.
