Formed design Coating Weight is about twice the wide-wound drawdown bar, wet film thickness 13μm, film accuracy of 0.5 micron, 304 stainless steel material to ensure durability.
Adopt formed design to avoid broken wire problem, wet film thickness 3μm to ensure uniform Spreader, 304 stainless steel material corrosion resistance and easy to clean and maintain.
Formed design to ensure uniform film, wet film thickness 42 μ m precise control, 304 stainless steel material corrosion resistance and long service life, effective application width 250mm for a variety of samples.
Using formed pRoduction process, wet film thickness 17 μ m, total length 400mm, not easy to block impurities and easy to clean, 304 stainless steel material to ensure durability.
Using a formed process, the film thickness is 64 microns, the total length is 2000mm, the stainless steel material is easy to clean and not rusting, installed in the pRoduction equipment to control Flow rate and maintain coating uniformity.
Spreader formed to ensure uniform pRoduction process, wet film thickness 120 microns, diaMeter 10mm, 304 stainless steel material, durable and easy to operate, improve Spreader Stability.
Using formed pRoduction process, wet film thickness 17 μ m, film accuracy 0.5 μ m. 304 stainless steel material ensures durability, matching handle makes Spreader force uniform, no pressure operation to improve Spreader mass.
Using formed process, wet film thickness 42 μ m, application width 250mm, easy to clean and continuous wire, effectively improve the uniformity and ease of operation of Spreader.
Using a formed pRoduction process, the wet film thickness is 52 microns, the application width is 300 mm, and the stainless steel material ensures durability and easy cleaning, suitable for hand-held operation.
Using formed pRoduction process, wet film thickness 96μm, application width 250mm, 304 stainless steel material to ensure durability and accurate Spreader effect, suitable for laboratory precision Spreader needs.
Using formed process, wet film thickness 6 µm, application width 2000mm, fixed groove design can erase excess fluid, keep coating uniform, stainless steel material durable and easy to clean.
Using extrusion process and 304 stainless steel material, the minimum wet film thickness can be controlled by 1.5 μm, and the groove design provides greater Coating Weight to avoid wire loosening and clogging problems.
The wet film thickness can be controlled by 1.5μm, the bottom of the groove is wider and the Coating Weight is large, and the extrusion process and chrome plating surface are adopted, which is not easy to loosen the broken wire, easy to clean and not blocked.
It can control the wet film thickness as low as 1.5μm. It adopts extrusion process and 304 stainless steel material. The bottom of the groove is wider and the Coating Weight is larger, and it is not easy to loosen and break the wire, and it is easy to clean.
Wet film thickness can be controlled 1.5μm, the bottom of the groove is wider Coating Weight is larger, using extrusion process and chrome plating surface, not easy to block and easy to clean.
