One-button intelligent operation can instantly measure Tear Strength and Tear Index, Measurement range 10~ 16000mN, accuracy +/- 1.0%, equipped with pneumatic fixture and thermal printer, to achieve efficient noise-free testing.
Measurement range 10~ 500mN, resolution 5mN, tear arm 104mm, paper size 25 * 15mm, suitable for accurate determination of paper Tear strength.
Measurement range 10~ 16000mN, resolution 0.1mN, pneumatic fixture to ensure stable clamping, thermal printer real-time output test data, suitable for a variety of sheet material Tear strength detection.
Measurement range covers 50-16000mN with 104mm tearing arm and 27.5 ° initial angle design, supporting accurate testing of multi-material Tear strength.
One-click intelligent operation rapid measurement Tear Strength, equipped with high-pixel LCD display measurement results, using imported thermal printing movement to achieve noise-free printing, Measurement range 10~ 16000mN, Precision up to +/- 1.0%.
Pneumatic fixture to achieve automatic clamping, no manual operation; Measurement range covers 10~ 16000mN, support a variety of sheet material Tear strength detection, equipped with 3.2 inch LCD display and thermal printer.
Optical inspection encoder is used for accurate measurement of tear angle, with dual gear Measurement range 50~ 16000mN, supports simultaneous testing of 4-layer samples, and is suitable for sheet composite strength analysis.
Measurement range covers 50~ 16000mN, tearing arm 104mm, conforms to GB/T 455 and ISO 1974 standards, suitable for a variety of sheet materials, Operating Conditions 0~ 35 ℃.
Using extrusion process and chrome plating surface, the wet film thickness can be as low as 1.5 μ m, and the groove design is wide to improve the Coating Weight, which solves the problem of traditional steel wire loosening and cleaning difficulties, and realizes stable ultra-thin Spreader.
The device has a 200gf to 6400gf multi-stop pendulum capacity, is suitable for tearing testing of a variety of materials, meets international standards such as ISO 6383 and ASTM D1922, and is easy to operate and has high accuracy.
The wet film thickness can be as low as 1.5μm to achieve ultra-thin Spreader; the bottom of the groove is wider, and the Coating Weight is larger; the extrusion process is adopted to avoid the problem of loose wire and broken wire, and it is easy to clean.
Travel 0-1.25 mm, measurement error +/- 1HAM, suitable for thin rubber samples with a thickness of 1.5mm or more. Sensitivity is high, and it needs to be used with a constant load measuring rack to ensure Precision.
Echo-echo technology implementation of 0.15mm ultra-thin part measurement, resolution of 0.001mm, can penetrate 0.5mm coating measurement substrate Film thickness, support sound speed calibrated and difference mode settings.
Using a formed pRoduction process, the film Film thickness is as thin as 4.6μm, the accuracy is up to 0.1 micron, and the effective Spreader width is 30cm. It can be used with an automatic Film Applicator and has the advantage of continuous wire.
Linear dispersion surface is formed by cold extrusion processing technology, no risk of wire loosening, wet film thickness 50 μ m, can achieve ultra-thin film Spreader, smooth surface and easy to clean.
