Using 12 ° angle of the visual axis to achieve three-dimensional three-dimensional imagery, working distance of 90mm, support reflected light and transmitted light illumination, the imagery is clear, wide and three-dimensional.
Adopting three-dimensional motion mode, Speed range 2450-4450rpm, dual-station operation, noise lower than 65dB, suitable for wet grinding and dry grinding of various sample tissues.
Using 1400rpm speed regulation and 1.5 liters effective volume sand grinding basket, rapid dispersion and grinding are achieved through tensile shear and Impact between sand and material, and the operation is simple.
The swirl/spin design is suitable for long-term use, with a three-dimensional roll tilt angle of 10 °, a maximum load of 5kg, a speed range of 10-70rpm, and can be operated in a low temperature Thermal Chamber.
The angle between the left and right visual axes is 12 ° to provide three-dimensional three-dimensional space images, the working distance is up to 90mm to support large sample observation, and the 2X and 4X objective lenses are used to achieve flexible zoom, and the imagery is clear and wide and easy to operate.
Adopt PLC + Touchscreen Control mode, flame height 12mm +/- 1mm adjustable, equipped with gas alarm and forced Air-Cooled system, three-dimensional adjustable fixture for easy observation and recording, stable and reliable.
With 12 ° viewing angle to achieve three-dimensional imagery, working distance of 90mm, support reflected light and transmitted light illumination, focusing range of 65mm to meet different sample observation needs.
Set dispersion and sand grinding functions in one, complete two processes in a single container, speed range 130~ 3000rpm, grinding basket size Φ 80x60mm, high efficiency and easy to clean.
The variable frequency motor is used to achieve stepless speed regulation from 0 to 7500 rpm, equipped with dispersed impeller and sand grinding blades, and the dual-axis constant force lifting system has a stroke of 200mm, which can adapt to different experimental requirements and calculate the material reaction relationship.
1400 rpm high-speed stirring is used to achieve strong tensile shear and Impact between the material and the sand, and the fineness of grinding can reach 25 microns or less, suitable for sample testing, with a capacity of 1.5 liters.
1400 rpm high-speed stirring is used to achieve strong tensile shear and Impact between the material and the sand, the fineness of grinding can reach 25 microns or less, and the capacity is 1.5 liters, which is suitable for laboratory sample dispersion grinding.
Using dual-axis constant force lifting system and variable frequency motor, 0-3000rpm stepless speed regulation, equipped with dispersed impeller and sand grinding blades, can directly calculate the relationship between material viscosity and reaction rate.
The linear velocity of blade disk is 10.5 m/s, the volume of material barrel is 1.8 L, and the aggregates are destroyed by strong impact and shearing to achieve high-efficiency dispersion and mixing, which is suitable for liquid material experiments.
Using 1320rpm high-speed dispersion shaft, equipped with 30L grinding cylinder to achieve strong shear impact on the ground, sieve discharge design is easy to clean and change color, adapt to different material fineness adjustment.
Continuously variable frequency speed regulation 0-3000rpm, ground medium 0.8-2 mm, stable operation and low noise, can work continuously for a long time, suitable for medium and low viscosity fluids.
