Speed up to 30000rpm, the maximum processing viscosity of 10000mPa.s, the use of claw high shear head structure and triple safety protection, can quickly homogenize tissue samples, stator and rotor interchangeable cost savings.
The rotational speed range is 200-11000rpm, the processing capacity is up to 40L, and the precision-matched stator structure is used to achieve high-efficiency shear emulsification, which is suitable for the dispersion of various viscosity liquids and granular materials.
Driven by a series-excited high-speed motor, Speed range 0-11000rpm, rotor maximum linear speed of 19m/s, tens of thousands of shear tears per minute, processing viscosity up to 8000cp, to achieve efficient emulsification dispersion.
Brushless motor to avoid Toner contamination of samples and reduce noise. The processing capacity covers 150 ml to 6 liters, supports a variety of head Modular replacements, and the intelligent Touchscreen can set the program, timing, line speed and torque.
With a speed of up to 30000rpm and a processing viscosity of 10000mPas, the claw-type high-shear structure and interchangeable stator and rotor provide triple safety protection and continuous 6-speed regulation, ensuring efficient dispersion and durability.
Using 16-bit microcomputer processor and stepper motor high subdivision drive, the whole process of stepless variable speed and stable Rotation speed, Measurement accuracy of +/- 1% F. S, LCD screen can display viscosity, shear rate, shear stress, Rotation speed, temperature and torque and other paraMeters.
Using 316 stainless steel working head, Speed range 1000-13000rpm, maximum processing viscosity 8000mpa.s, with stepless speed regulation and real-time data display function, suitable for shear emulsification experiments of various viscosity liquids.
Driven by high-speed motor, the speed range is 1000-13000rpm, the maximum processing viscosity is 8000mpa.s, with constant speed control and overload protection, suitable for shear emulsification experiments of various viscosity liquids.
Speed range 8000-28000rpm, Processing capacity 50-1500ml, through high-speed swirl/spin to generate strong shear force, to achieve instant uniform dispersion emulsification, suitable for high viscosity material processing.
Speed range 8000-28000rpm, Processing capacity 1-60ml, strong shear and turbulence are generated by high-speed swirl/spin to achieve instant uniform dispersion emulsification, suitable for high viscosity materials.
Rotation speed is accurate and stable with high subdivision drive stepper motor, built-in RTD temperature sensor real-time monitoring sample temperature accuracy 0.1 ℃, support 2000 kinds of shear rate stepless setting and synchronous display Multi-ParaMeter.
Rotation speed up to 26000rpm, providing 27m2/s shear line speed, long-term stable operation, fine and uniform processing of materials, no dispersion dead angle, suitable for high viscosity up to 10000CP working conditions.
Range 320~ 320000000mPa · s, support 0.1~ 200rpm stepless speed change, LCD screen can simultaneously display viscosity, shear rate, shear stress and other sets of paraMeters, with a small number of sample adapters only 10-20mL sample volume.
Small hydraulic device to achieve masonry shear test, rated thrust 150KN, digital pressure Gauge direct reading, accuracy +/- 1%, detection of local damage, easy to operate.
Using frequency conversion control to achieve a wide range of 60~ 8000rpm speed regulation, the maximum processing viscosity of 100000mPa.s, set dispersed ground stirring function in one, through high-speed swirl/spin to pRoduce a strong shear effect to improve the mixing efficiency.
