Maximum load 50Kg, Test speed 10~ 60mm/min adjustable, using pointer sensing mode, effective Travel 0~ 360mm, suitable for vertical angle disbonding test.
Full digital control AC motor, speed accuracy of 0.5%; aluminum extrusion sealing plate built-in double roller screw structure, Test speed range of 0~ 300mm/min, with upper and lower limit and overload protection function.
Adopt the circular roller scratch method to evaluate the adhesion grade, describe the adjustable diaMeter of 0-10.5 mm, equipped with four weights to achieve 200-1000g loading, table Travel ≥ 80mm, manual operation is stable and reliable.
Adopt stepper motor to achieve stepless speed regulation of 1~ 500mm/min, equipped with 500N force value Measurement range and +/- 1% accuracy level, with overload protection and limit protection functions, stable and reliable operation.
The dual-station design can simultaneously carry out two sets of tests, the roller load is 2000g +/- 5g, and the rolling speed is 300mm/min, which conforms to CNS-11888 and PSTC-8 standards to ensure uniform preparation of the sample.
Using precision screw pair and servo motor drive, the test speed range is 1~ 500mm/min, the effective stroke is 800mm, with overload protection and limit protection functions, and the operation is stable and reliable.
Hydraulic pump is used to uniformly pull off the test column, the speed does not exceed 1MPa/s, the test force is directly displayed by liquid crystal, and the adhesion failure and cohesion failure can be distinguished, with an accuracy of +/- 1% F.S.
Using 2000g +/- 5g roller load and 300mm/min rolling speed to ensure that the adhesive tape sample is flat and evenly adhered to the standard substrate, in line with CNS-11888 and PSTC-8 design standards.
The paint film adhesion was measured by the circular trace method, the drawing diaMeter was 0-10.5 mm, and the Working Travel was 80mm. The integrity of the paint film was evaluated according to seven grades, and the operation was simple and reliable.
Accessories can detect buttons and other fixed strength, to prevent loosening caused by sharp edge angle damage, the maximum tensile force of 30kg, suitable for clothing toys footwear and other pRoducts adhesion testing.
Mechatronics design integrated measurement display circuit, manual operation with 20mm/50mm kit, range of 10KN accuracy ≤ +/- 1% F. S, with linear correction and automatic clearing function for a variety of coating platings strength test.
With 0.5 accuracy and 200kg capacity, it supports a variety of disbonding tests such as 180 ° and 90 ° disbonding, automatically records Linear dispersion and analyzes MAX Maximum, MIN Minimum and Average for a variety of material inspections.
Measurement accuracy of 0.5 with High Accuracy Sensor, speed range 5~ 500mm/min, support automatic Linear dispersion analysis and multi-point data collection, tensile, tear and disbonding tests.
With 0.5 levels of accuracy and a speed range of 5-500mm/min, it supports automatic drawing of disbonding Linear dispersion and calculation of interval results, and can resolve MAX Maximum, MIN Minimum and Average for a variety of material tests.
With 0.5 accuracy and 5~ 500mm/min speed adjustment range, it supports automatic drawing of disbonding Linear dispersion and calculation of interval results. It can distinguish MAX Maximum, MIN Minimum and Average, and effectively Travel up to 400mm.
