Tensile Strength and elongation paraMeters can be detected, test force 500-3000N optional, accuracy +/- 1%, stepless speed 1-500mm/min, suitable for all kinds of paper and Cardboard materials.
Test method to achieve tensile compression test, Accuracy grade 1, equipped with 7-inch touch screen display tensile curve, support 50 kinds of fixtures to meet more than 1000 material testing needs.
Accessories can detect buttons and other fixed strength, to prevent loosening caused by sharp edge angle damage, the maximum tensile force of 30kg, suitable for clothing toys footwear and other pRoducts adhesion testing.
Full digital control AC motor, speed accuracy of 0.5%; aluminum extrusion sealing plate built-in double roller screw structure, Test speed range of 0~ 300mm/min, with upper and lower limit and overload protection function.
Adopt horizontal structure and High Accuracy deceleration servo drive system, equipped with precision ball screw and double linear slide rail, force value resolution up to 0.001N, support a variety of stop modes and unit selection, can realize stepless speed regulation function.
Full digital control AC motor, speed accuracy of 0.5%; aluminum extrusion sealing plate built-in double roller screw, improve load efficiency; support upper and lower limits and overload protection, stable and reliable test.
Using ball screw and 3 guide shaft drive mechanism, Measurement range 0-1000N, support a variety of sample size and tensile speed adjustment, built-in thermal printer and RS232 Communication interface.
Can measure 20~ 1000J/m ² Internal Bond Strength, resolution of 0.001lbf/in ², using 90 ° Impact Angle test principle, clamping force 0~ 40kg/cm ² adjustable.
Using horizontal structure and High Accuracy deceleration servo drive system, equipped with 0.001N force value resolution and 0.001mm Displacement resolution, supports multiple stop modes and unit selection, suitable for accurate mechanical properties testing of thin sheet materials.
Full digital control AC motor, speed accuracy of 0.5%; aluminum extrusion sealing plate built-in double roller screw, improve load efficiency; support upper and lower limits and overload protection, stable and accurate testing.
Adopt Pneumatic Automatic Clamping Mode, Adjustable Clamping Pressure 0.2-0.7Mpa, Equipped with Rapid Sensing Protection Device and Precision Ball Screw, Ensure Test Stability and Convenience of Operation.
Measurement accuracy +/- 1%, force value resolution 1/200000, with breakpoint ratio 0~ 99% adjustable function, support tensile, tensile shear, tear and other mechanical properties test, with Travel limit and overload protection.
Adopt High Accuracy Deceleration Servo Drive System, equipped with 0.001N force value resolution and 0.001mm Displacement resolution, support 1-500mm/min stepless speed regulation, with multiple shutdown modes and intelligent operation functions to ensure accurate and reliable test data.
Control mode closed loop accuracy, Measurement range 50N to the maximum load, displacement rate 1-500mm/min stepless speed, equipped with universal joint structure to ensure the test concentricity and eliminate the influence of irregular samples.
Control mode using closed-loop high accuracy, equipped with cross pin universal joint to ensure concentricity. Measurement range 1000N, displacement rate 1-500mm/min adjustable, with over-current and over-voltage protection function.
