Adopt stepper motor to achieve stepless speed regulation of 1~ 500mm/min, equipped with 500N force value Measurement range and +/- 1% accuracy level, with overload protection and limit protection functions, stable and reliable operation.
Using precision screw pair and servo motor drive, the test speed range is 1~ 500mm/min, the effective stroke is 800mm, with overload protection and limit protection functions, and the operation is stable and reliable.
Maximum load 50Kg, Test speed 10~ 60mm/min adjustable, using pointer sensing mode, effective Travel 0~ 360mm, suitable for vertical angle disbonding test.
With 0.5 accuracy and 200kg capacity, it supports a variety of disbonding tests such as 180 ° and 90 ° disbonding, automatically records Linear dispersion and analyzes MAX Maximum, MIN Minimum and Average for a variety of material inspections.
Measurement accuracy of 0.5 with High Accuracy Sensor, speed range 5~ 500mm/min, support automatic Linear dispersion analysis and multi-point data collection, tensile, tear and disbonding tests.
With 0.5 levels of accuracy and a speed range of 5-500mm/min, it supports automatic drawing of disbonding Linear dispersion and calculation of interval results, and can resolve MAX Maximum, MIN Minimum and Average for a variety of material tests.
With 0.5 accuracy and 5~ 500mm/min speed adjustment range, it supports automatic drawing of disbonding Linear dispersion and calculation of interval results. It can distinguish MAX Maximum, MIN Minimum and Average, and effectively Travel up to 400mm.
The High Accuracy Sensor is used to achieve 0.5 level Measurement accuracy, supports 5~ 500mm/min speed range, and is equipped with automatic Linear dispersion analysis function, which can calculate interval results and distinguish MAX Maximum, MIN Minimum and Average.
The equipment is designed according to the international coating stain resistance experimental method, the water Tank volume is 5L, the inner diaMeter of the flow pipe is 8mm, and the time control range is 0~ 99h99s. It is suitable for the stain resistance test of building exterior coatings.
4-Terminal Resistance Measuring method is used to eliminate the influence of wire resistance. Test speed is up to 6 times/sec. Measurement current is less than 100mA to prevent temperature drift and ensure Precision and Stability.
With 0.5 accuracy and 5~ 500mm/min speed range, using High Accuracy Sensor and stepper motor control, support automatic Linear dispersion analysis and multi-interval result calculation, effective Travel up to 400mm.
Using 2-wire method and 3-wire method measurement, Ground Voltage Measurement range 0~ 200V, Ground Resistance Measurement range 0~ 1999 Ω, Response Time about 5 seconds, with continuous measurement and overload protection function.
Double grinding head assembly configuration, total weight 1500g, Reciprocating Frequency 37 +/- 2 times/min, Travel 300mm, can accurately evaluate the stain resistance of the film.
Impact angle of 90 °, can test 5 groups of specimens at the same time, the minimum reading value is 0.005 kg-cm, the mechatronics design is compact, and meets the requirements of many international standards.
With four adjustable friction Frequency 21/43/85/106cpm, friction load 20N, support linear reciprocating friction movement, power-off memory function to ensure that paraMeters are not lost, effective analysis of coating adhesion and wear resistance performance.
