The ink wiping speed is 15.5cm/min, the opening area of the ink coating platen is 20cm ², and the ink absorption time is 120s. The test process is automatically controlled to accurately determine the absorption capacity and penetration performance of the paper to inks.
The ink wiping speed is 15.5 +/- 1.0cm/min, the opening area of the ink coating platen is 20 +/- 0.4cm ², and the ink absorption time is 120 +/- 5s. It is controlled by 4.3 inch color Touchscreen, which is suitable for the absorption performance measurement of paper inks.
Using microcomputer automatic control, the ink wiping speed is 15.5 +/- 1.0cm/min, the opening area of the ink coating platen is 20 +/- 0.4cm ², and the automatic adjustment range of paper pattern thickness is supported by 0.1~ 1.0mm. Test accuracy and operation convenience are ensured.
Using 15.5cm/min ink wiping speed, equipped with 0.1mm ink coating platen, the test process is precisely controlled by 4.3 inch Touchscreen, which can accurately determine the absorption capacity of the material to the inks vehicle.
The instrument can measure the performance of paper or Cardboard absorbing inks in the specified time and area, the ink wiping speed is 15 +/- 0.5cm/min, the opening area of the ink coating platen is 20 +/- 0.4cm ², and the 4.3-inch color Touchscreen is used.
The ink wiping speed of the instrument is 15.5 +/- 25px/min, the ink absorption time is 120 +/- 5s, and the 4.3 color Touchscreen control can accurately evaluate the acceptance of inks and the absorption capacity of the vehicle.
The equipment supports 0-2MM pressure adjustment, providing three-speed printing speed (10/15/20 rpm) and uniform ink speed (650/800/1000rpm), which can imprint 2.5mm thick paper and 1mm plastic film to achieve precise uniform ink and stable operation.
Tack is good and non-degumming, adhesion reaches 7.6 N/cm, mass performance is stable, suitable for cross-cut adhesion testing, to ensure accurate film integrity assessment.
Automatic ink running stability, ink time and speed can be set, printing pressure 0~ 2mm adjustable, provide low, medium and high three printing speed, each time can be proofed 4 colors to facilitate Color contrast.
The adhesion was measured by the circular trace method, the drawing diaMeter was 0~ 10.5mm, and the Working Travel ≥ 80mm. The integrity of the paint film was evaluated by seven grades, and the operation was simple and conformed to the GB/T1720 standard.
Adjustable pressure 0~ 2mm, support three uniform ink speed 650-1000rpm and printing speed 10-20rpm, automatic uniform ink function to ensure stable operation, suitable for different thicknesses of paper and plastic film proofing comparison.
The friction speed is adjustable from 21 to 106 rpm, and the friction load is 908g or 1810g. It supports a variety of test modes such as dry grinding, wet grinding, and decolorization changes. The automatic shutdown function ensures accurate control of the number of tests.
The device can precisely control the film thickness of the ink layer of the color strip, and the ink injection amount is 0.0012g, which is used for ink contrast and color concentration detection.
It can simultaneously print color bars of different Colors or Ink Film thickness, detect inks Hue and Gloss, uniform ink time can be adjusted from 1 to 800 seconds, support dry and wet ink discoloration analysis and abrasion resistance testing.
Made of stainless steel, the cutter tooth spacing is 1-3mm, the cut mark length is 35mm, and the coating is cut through the grid pattern, and the adhesion effect is evaluated according to the six-level classification, which is suitable for a variety of surface tests.
