Adopting non-vacuum design, equipped with Mo target and electric refrigeration detector, with seven kinds of light path automatic switching and multiple radiation protection, to ensure efficient and safe testing.
Equipped with a long working distance flat-field color difference elimination objective lens and four sets of fluorescence filters, it supports phase contrast observation and fluorescence switching, and the fretting grid value is up to 2 μm, which is suitable for clear imagery of living cells and liquid samples.
Infinity Optical inspection system, support for Brightfield, Fluorescence, Phase Contrast, Polarization Observation mode; equipped with six-hole converter with DIC slot and 100W mercury lamp light source, providing high-resolution images; autofocus system to maintain sample focal plane stability.
Continuous zoom range 7X~ 63X, working distance up to 110mm, equipped with Process Color LED fluorescence excitation assembly and hinged trinocular observation head, support a variety of fluorescence Observation modes.
Measurement range 0~ 1250μm, suitable for LEEB220 and LEEB222 Coating thickness Gauge, Abrasion Resistance is good, suitable for a variety of nonmagnetic Coating thickness detection.
Optical inspection fluorescence technology for measurement of dissolved oxygen, no polarization time, fast Response and not affected by Flow velocity; Built-in temperature sensor, Measurement range 0.00-50 mg/L, accuracy up to 1.5% +/- 0.01mg/L; Protection Rating IP68, suitable for harsh environments.
Using fluorescence measurement technology without replacing the diaphragm and electrolysis solution, Measurement range 0.000~ 20.00mg/L accuracy +/- 0.20mg/L, support 3000 sets of Data storage and interval timing measurement, IP57 Protection Rating.
Dedicated to Coating thickness Gauge calibrating, ensure accurate thickness measurement, suitable for F type equipment, improve Reliability.
Measurement principle using ultrasonic, Measurement range 50~ 3800μm, accuracy +/- (2μm + 3%), suitable for concrete and fiberglass substrate Coating thickness detection.
Using the formed pRoduction process, the wet film thickness is 6 microns, the accuracy is 0.5 microns, the cleaning is convenient and there is no worry of broken wire, to ensure the precision and durability of the coating prepative.
Measurement thickness up to 25mm with an error of only +/- 3% with removable FJS Probe for thick protective coating substrates, statistical capabilities and 250,000 Data storage capabilities.
Using the formed pRoduction process, Coating Weight is about twice that of the wire-wound coating Rod, wet film thickness is 13μm, film accuracy reaches 0.5 μm, and the material is 304 stainless steel.
Spreader 13 micron wet film thickness, application width up to 300mm, 304 stainless steel for durability and precise coating control.
Using magnetic Induction and eddy Current principle simultaneous measurement composite coatings, Measurement range 0~ 1500μm, error +/- 1%, can display a single coating and zinc layer thickness, suitable for the accurate detection of ferrous and non-ferrous substrates.
Measurement principle using ultrasonic, Measurement range 13~ 1000μm, accuracy +/- (2μm + 3%), suitable for wood, plastic and other substrates polymer Coating thickness detection.
