Hydraulic automatic pull-off test, the pull-off speed is stable and controllable, the accuracy is +/- 1% full scale, equipped with pull-off kit size 10-50mm, built-in rechargeable battery and 200,000 Data storage.
Equipped with a 20mm kit and trimmer, the range covers 0-20MPa, and precise positioning is achieved through a transparent sleeve, specially designed for high viscosity coating adhesion testing.
Portable design built-in lithium battery, 0-3000p range accuracy +/- 1%, equipped with 10-50mm pull-off spindle, automatic calculation of pull-off force without conversion table, aluminum alignment unit to ensure uniform testing.
Hydraulic pump is used to uniformly pull off the test column, the speed does not exceed 1MPa/s, the test force is directly displayed by liquid crystal, and the adhesion failure and cohesion failure can be distinguished, with an accuracy of +/- 1% F.S.
Suitable for low adhesion coating measurement, range 0~ 3.5MPa, using 50mm kit to provide High Accuracy and Repeatability, matching edge trimmer and transparent sleeve to ensure convenient and reliable testing.
Hydraulic system measurement coating adhesion, accuracy control within +/- 1%, equipped with self-positioning kit to ensure smooth and rough surface measurement results consistent, optional 10mm to 50mm variety of kit specifications.
Hydraulic system to achieve coating detachment test, accuracy of +/- 1% full scale, equipped with multi-function digital display, support for a variety of kit size automatic calculation, portable design for a variety of places.
Hydraulic system measurement coating adhesion, accuracy control within +/- 1% full scale, equipped with multi-function digital display, can automatically calculate different kit size results, self-positioning kit to adapt to various surfaces.
14Mm diaMeter design, starting pressure 1.4MPa, maximum pulling pressure up to 50MPa, suitable for a variety of drawing adhesion instrument, providing stability testing performance.
Using 14mm spindle diaMeter, Measurement range 0-45.5 MPa, with adjustable electric loading rate, support for pull-out force-time Linear dispersion display and large-capacity data storage.
Tack is good and non-degumming, adhesion reaches 7.6 N/cm, mass performance is stable, suitable for cross-cut adhesion testing, to ensure accurate film integrity assessment.
Hydraulic system measurement coating adhesion, accuracy +/- 1% full scale, optional 10-50mm kit, self-positioning characteristics on smooth rough surfaces do not affect the results, Portable design without external power supply.
The adhesion was measured by the circular trace method, the drawing diaMeter was 0~ 10.5mm, and the Working Travel ≥ 80mm. The integrity of the paint film was evaluated by seven grades, and the operation was simple and conformed to the GB/T1720 standard.
Made of stainless steel, the cutter tooth spacing is 1-3mm, the cut mark length is 35mm, and the coating is cut through the grid pattern, and the adhesion effect is evaluated according to the six-level classification, which is suitable for a variety of surface tests.
The paint film adhesion was measured by the circular trace method, the drawing diaMeter was 0-10.5 mm, and the Working Travel was 80mm. The integrity of the paint film was evaluated according to seven grades, and the operation was simple and reliable.
