Adopt double-pointer design, pressure needle Travel 0~ 2.5mm, measurement error +/- 1HAO, can be handheld or used with the bench, suitable for stable and fast detection of low Hardness rubber materials.
Supporting D-type Shore DuroMeter, applying 5kg test force by weight, equipped with Glass bench and adjusting nut to ensure full contact with the sample and improve measurement Stability.
Can be used with A type or C type Shore DuroMeter, fixed load weight mass 0.75 +/- 0.05kg, hardness Gauge clamping Rod connection size M7x0.5mm, improve hardness testing accuracy and Stability.
With tracking pointer and peak pointer double pointer design, pressing needle Travel 0-2.5 mm, Measurement range 10-90Hc, suitable for material testing with pressure above 0.049MPa when the compression rate is 50%, and can be matched with test bracket to improve Stability.
Double pointer design for easy reading, Pin Travel 0~ 2.5mm, Measurement range 0~ 100HD, error +/- 1HD, lightweight and portable only 0.16kg, suitable for on-site Hardness detection.
Dual pointer design can display the current value and peak value at the same time, the pressure at the end of the crimp is 445mN, and the measurement error is +/- 1HD, which is suitable for plastic sample condition adjustment testing.
Suitable for low and medium Hardness material measurement, pressure needle end pressure 0.55N-8.06N, pressure needle stroke 0-2.5 mm, can be matched with test rack to reduce manual operation error, improve test accuracy and Repeatability.
Double pointer design can be used with rack or hand, pressing needle Travel 0-2.5 mm, measurement error +/- 1HA, suitable for rubber and plastic hardness testing.
Suitable for Medium and Low Hardness Material Testing, Needle Stroke 2.5mm, Needle Head Size Φ 0.79mm. It can be matched with a special test frame to improve Measurement accuracy and Stability.
Adopt R1.2 hemispherical pressure needle, Accuracy ≤ +/- 1H, support multi-unit measurement and automatic shutdown, suitable for soft rubber, thermal plasticity plastic and other materials, Operating temperature 0~ 50 ℃.
Measurement range 0-100HD, recommended to use 20-90HD range, pressing needle stroke 2.5mm, pressing head SR0.1mm, can cooperate with the test rack to improve Measurement accuracy.
Adopt R1.2 hemispherical pressure needle, Accuracy ≤ +/- 1H, support a variety of Hardness unit measurement, with automatic shutdown and low voltage prompt function, weight only 170g is easy to carry operation.
Pin Travel 0~ 2.5mm, Measurement range 0~ 100HA, Error +/- 1HA, Dual pointer design can display real-time and peak Hardness value at the same time, easy to use handheld or rack.
Measurement range is 0~ 100HA, resolution up to 0.1HA, measurement error ≤ +/- 1HA (20-90HA), Ambient Temperature 0~ 40 ℃, Dimension 173 * 56 * 42mm, weight 233g, support RS232 communication cable.
Measurement range > 90B < 20D, support male/imperial unit conversion, with average calculation and MAX Maximum latch function, can output data in various ways through USB/RS-232/Bluetooth.
