Set grinding, dispersion, stirring functions in one, using electronic speed line, digital display Rotation speed, Motor Power 400W, Lift Travel 200mm, suitable for a variety of experimental needs.
Using 15.5cm/min ink wiping speed, equipped with 0.1mm ink coating platen, the test process is precisely controlled by 4.3 inch Touchscreen, which can accurately determine the absorption capacity of the material to the inks vehicle.
Electric lift Travel 400mm, speed range 300~ 6000rpm, frequency conversion electromechanical operation quiet noise, suitable for laboratory liquid materials dispersed stirring.
Adopt Rotation Rotation Rotation Noncontact Mixing & dispersing method, Rotation Rotation ratio 1:0.7, Processing capacity up to 700ml, can complete defoaming stirring in a few seconds to a few minutes, No need to clean appliances, Repeatability is high.
Brushless DC motor to avoid replacing brushes, electric lifting operation labor-saving, Power 3.7KW, speed range 30-3000rpm, with Rotation speed display function.
Automatic ink running stability, ink time and speed can be set, printing pressure 0~ 2mm adjustable, provide low, medium and high three printing speed, each time can be proofed 4 colors to facilitate Color contrast.
The ink wiping speed of the instrument is 15.5 +/- 25px/min, the ink absorption time is 120 +/- 5s, and the 4.3 color Touchscreen control can accurately evaluate the acceptance of inks and the absorption capacity of the vehicle.
The device can precisely control the film thickness of the ink layer of the color strip, and the ink injection amount is 0.0012g, which is used for ink contrast and color concentration detection.
The ink wiping speed is 15.5cm/min, the opening area of the ink coating platen is 20cm ², and the ink absorption time is 120s. The test process is automatically controlled to accurately determine the absorption capacity and penetration performance of the paper to inks.
It can simultaneously print color bars of different Colors or Ink Film thickness, detect inks Hue and Gloss, uniform ink time can be adjusted from 1 to 800 seconds, support dry and wet ink discoloration analysis and abrasion resistance testing.
The equipment set stirring, sand grinding, dispersing functions in one, using Minbu motor to achieve 0-2800rpm speed regulation, lift Travel 250mm, with small size, low noise and no carbon brush abrasion characteristics.
Equipment set stirring, sand grinding, dispersing multi-function in one, using dual-axis constant force automatic lifting system, lifting Travel 250mm, speed range 0-2800rpm, with small size, low noise, no carbon brush abrasion characteristics.
Adopt frequency conversion motor to run quietly, electric lifting operation is convenient, maximum Rotation speed 3000rpm, lifting Travel 400mm, suitable for 0-20L capacity material handling.
The use of electric lifting system to achieve 320mm Travel adjustment, frequency control range of 60-6900rpm, equipped with multi-specification impeller and chill down jacket structure, can meet the needs of stirring and dispersing under different material viscosity.
The use of low-speed intermittent barrel edge stirring, mixing inks evenly within five minutes without heating up, Speed range 0~ 60rpm, L-type paddle stirring design is clean and simple, direct transmission to reduce power loss.
