Adopting double swing bar design, steel ball diaMeter 8mm, swing period 0.625s, automatic counting function, accurate measurement of film resilience changes, easy to operate.
Using 500g swing Rod mass and 8mm steel ball diaMeter, automatic counting function can accurately measure coating surface Hardness, swing cycle of 1 second to achieve efficient testing.
Adopting a stepper motor automatic positioning and electromagnetic release system, the swing period is 1.4 seconds, and the steel ball diaMeter is 5 mm, providing visual and acoustic test end signals.
The stepper motor is used to achieve fully automatic positioning, the electromagnetic system releases the swing Rod, the Persoz swing Rod cycle is 1 second, and the swing time on the flat Glass is 430 +/- 15 seconds. There are visual and acoustic signals at the end of the test.
Using 200g swing Rod mass and 5mm steel ball diaMeter, automatic counting function can accurately measure coating soft Hardness, swing cycle 1.4s to ensure Data Reliability.
Measurement accuracy is ensured by the automatic counting function and the coating attenuation characteristics are determined by the stainless steel ball support.
Konig and Persoz swing bars are used, Konig swing period is 1.4s, Persoz swing period is 1s, and the number of swing angles is automatically recorded, which is suitable for accurate determination of paint film Hardness.
Using stopwatch counting method, the length of the swing Rod is 500 +/- 1mm, and the total mass of the swing is 120 +/- 1g. The resistance to deformation is evaluated by measuring the ratio of the swing amplitude time on the film to the swing time on the Glass.
The photoelectric counter is used to realize automatic counting, and the measurement is fast and accurate; the period of M-3 swing Rod is 0.625s, and the swing time on standard Glass is 440 +/- 6s; the horizontal mechanism is improved, and the scale can be moved horizontally to facilitate zero adjustment.
Equipped with 200 +/- 0.2g Koenig pendulum and 500g platinum saz pendulum two configurations, the swing period is 1.4 +/- 0.02s and 1 +/- 0.001S, through the photoelectric system automatic measurement of film damping time, to meet the different standards of test requirements.
Adopt all directions swing vibration mode to ensure that the paint is fully mixed, Vibration Frequency 550 times/min, equipped with 0-15 minute timing function, suitable for 80-240mm barrel height range.
Using Konig swing Rod, mass 200g, swing period 1.4 +/- 0.02s, can swing 250 +/- 10s on flat Glass, suitable for coating damping test, accurate measurement Hardness change.
Adopt double guide Rod structure to ensure Stability, range 10KN accuracy 0.5, support force holding and pull-off stop function, with four test modes and adjustable speed range 0-500mm/min.
Adopt double-pointer design, pressure needle Travel 0~ 2.5mm, measurement error +/- 1HAO, can be handheld or used with the bench, suitable for stable and fast detection of low Hardness rubber materials.
Adopt double guide Rod structure to ensure Stability, Maximum Measured value 5000N, Travel 220mm, support stepless speed regulation and a variety of test modes, with pull-off stop and force retention functions.
