Using formed process, wet film thickness 35 microns, application width 400mm, continuous wire, uniform film and good repRoducibility, easy to clean after the experiment.
Adopting spiral trapezoidal screw, it has the characteristics of manual operation, simple stability, vertical and lying dual-use, the maximum load is 500N, and the tensile force is Travel 200mm. It is suitable for tensile and compressive load, insertion and unplugging force, and failure test.
The equipment integrates dispersion and stirring functions, lifting Travel 250mm, with a maximum processing viscosity of 100000mPa.s. It adopts a dual-axis constant force lifting structure, resulting in stable operation and uniform mixing.
Set dispersion and stirring functions in one, lifting Travel 250mm, speed range 100~ 8000rpm, dual-axis constant force lifting to ensure stable operation, processing viscosity up to 100000mPa.s.
Using electric lifting platform and three-phase asynchronous motor, the speed range is 0~ 2880rpm, the maximum processing viscosity is 30000cp, the operation is stable and the noise is small, it can operate for a long time, the dispersion disc is resistant to corrosion and easy to disassemble.
Adopt trapezoidal screw drive and integral nut design, rated load 500N, Travel 150mm, can be firmly clamped to prevent partial load, fast loading and unloading to improve measurement accuracy, vertical and horizontal dual-use to adapt to a variety of test scenarios.
Using an electric lifting platform, lifting Travel 500mm, equipped with a three-phase asynchronous motor can achieve stepless speed regulation from 0 to 2880rpm, with a maximum processing viscosity of 30000cp, stable operation and low noise.
Electric lifting platform equipped with 500mm Travel, 0~ 2880rpm stepless speed range, the maximum processing viscosity of 30000cp, using stainless steel dispersion disc and three-phase asynchronous motor, stable operation noise, can run for a long time.
Adopt electric lifting system and frequency conversion speed regulation technology, Speed range 60~ 6900rpm, Power 1100W, equipped with dispersed impeller and sand grinding blades, can adapt to different impeller diaMeters, support chilling down water circulation temperature control.
Electric lifting platform Travel 500mm, speed range 0-2880rpm, maximum processing viscosity 30000cp, hexagonal screws connected to the dispersion disc for easy disassembly and assembly, long-term stable operation.
Adopt spring electric lifting system, Travel 200mm; Frequency conversion motor Power 750W, speed range 60-8000rpm; with dispersed impeller and sand grinding blades, can be adapted to jacket chill down Mixing Tank for multi-purpose experimental operation.
With a wide range of 0-2800rpm speed regulation and 250mm automatic lifting Travel, the dual-axis constant force system is used to achieve smooth lifting, and the integrated sand disc and dispersion disc meet a variety of process requirements.
Adopt trapezoidal screw drive, rated load 500N, Travel 150mm, with manual operation, simple and stable, vertical lying dual-use and other characteristics, suitable for tensile and compressive load and failure test.
It adopts trapezoidal screw drive and side handwheel loading mode, which is stable and easy to operate. It is equipped with a mobile base platform, which can realize free movement of front, rear, left and right. The rated load is 500N, and the Test Travel is up to 250mm, which meets a variety of mechanical testing requirements.
Rotation speed 0-1500rpm, Vacuum Level up to -0.9mpa, using hydraulic lifting and closed barrel lid design to avoid solvent volatilization, with sight glasses and searchlights to observe the stirring state in real time, support non-standard customization.
