Using formed process, wet film thickness 35 microns, application width 400mm, continuous wire, uniform film and good repRoducibility, easy to clean after the experiment.
Adopting spiral trapezoidal screw, it has the characteristics of manual operation, simple stability, vertical and lying dual-use, the maximum load is 500N, and the tensile force is Travel 200mm. It is suitable for tensile and compressive load, insertion and unplugging force, and failure test.
Adopt trapezoidal screw drive and integral nut design, rated load 500N, Travel 150mm, can be firmly clamped to prevent partial load, fast loading and unloading to improve measurement accuracy, vertical and horizontal dual-use to adapt to a variety of test scenarios.
Coating thickness control of 4-120μm using wire-wound structure, spiral winding design up to 500μm thickness, with 220mm application width and 0.64mm wire diaMeter to ensure Spreader uniformity.
Wet film thickness 22.9 microns, diaMeter 9.52 mm, the forming Rod uses an extrusion process to process continuous grooves, with no wire breakage and easy cleaning; the wire-wound Rod is based on the traditional principle, and there are differences in coating amount.
The precision drawing stainless steel wire winding structure is adopted, and the wet film thickness is precisely controlled by the groove. The closed winding design supports 4-120 μm coating, and the spiral winding can reach 500 μm thickness.
Precision drawing stainless steel wire winding manufacturing, groove control wet film thickness accurate, repeatability, closed winding Spreader thickness of 4 to 120 μ m, spiral winding up to 500 μ m, diaMeter 9.5mm total length 570mm.
Adopt trapezoidal screw drive, rated load 500N, Travel 150mm, with manual operation, simple and stable, vertical lying dual-use and other characteristics, suitable for tensile and compressive load and failure test.
It adopts trapezoidal screw drive and side handwheel loading mode, which is stable and easy to operate. It is equipped with a mobile base platform, which can realize free movement of front, rear, left and right. The rated load is 500N, and the Test Travel is up to 250mm, which meets a variety of mechanical testing requirements.
With bar and Drawdown blade two Spreader mode, using clamshell Drawdown blade head and new bar Installation method, easy to clean. Spreader speed and length can be freely adjusted, film thickness control accuracy is high, suitable for Glass, cardboard and other substrates.
Formed process to achieve 35 micron wet film thickness, uniform film and good repRoducibility, 304 stainless steel material is not easy to break and easy to clean.
Equipped with a digital ruler to collect displacement data, the resolution is up to 0.01mm, the maximum measurement load is 500N, the base has a mobile platform for easy installation of fixtures, and the side handwheel is easy to load and operate.
The wire-wound process can pRoduce a wet film thickness of 96 μm with a coating width of up to 300 mm, utilizing stainless steel material to ensure durability and precise coating control.
Using wire-wound stainless steel wire structure, the film thickness is 100 microns, the total length is 375mm, and the application width is 255mm to ensure that the Spreader is uniform and firm, suitable for precision experimental operation.
The wire-wound structure enables coating with a 171.5-micron thick film, while the stainless steel material ensures corrosion resistance and long-term durability. The 9.52mm diaMeter Rod body, combined with 1.91mm steel wire, ensures operational stability.
