Using 180 * 480mm size, with wire Rod or Film Applicator scraping ink, is conducive to the film flat and effective, improve film mass.
Wet film thickness 137.2 μm, coating width 300 mm. The wire-wound structure enables the preparation of uniform coatings on both flat and easily raised substrates, while the two-end hand grip design facilitates even force distribution during operation.
Wire-wound structure ensures 0.1 micron High Accuracy, wet film thickness 50.3 μm, stainless steel material is durable and easy to clean, and the wide-Rod Film Applicator achieves uniform coating.
Using the formed pRoduction process, the wet film thickness is 6 microns, the accuracy is 0.5 microns, the cleaning is convenient and there is no worry of broken wire, to ensure the precision and durability of the coating prepative.
Support bar and Drawdown blade double coating method, suitable for high, medium and low viscosity materials; coating speed 1~ 300mm/s stepless adjustable, Blade Coating accuracy +/- 3μm; equipped with innovative clamshell magnetic Drawdown blade and simple bar installation, easy to clean and load; Heating and Vacuum chuck function to improve Spreader mass.
Using 15.5cm/min ink wiping speed, equipped with 0.1mm ink coating platen, the test process is precisely controlled by 4.3 inch Touchscreen, which can accurately determine the absorption capacity of the material to the inks vehicle.
Imported High Accuracy coating Rod, Spreader thickness range 1~ 571.5μm, accuracy +/- 0.003mm, speed 5~ 200mm/s, support Touchscreen control and a variety of customized functions.
Glass material ensures that the film is flat, used with wire Rod or Film Applicator, the specification size is 110 * 180mm, and the operation is simple and efficient.
Using 160 * 280mm size, with wire Rod scraping ink to ensure that the film is flat, Glass table is conducive to operation and observation effect.
Using the formed pRoduction process, Coating Weight is about twice that of the wire-wound coating Rod, wet film thickness is 13μm, film accuracy reaches 0.5 μm, and the material is 304 stainless steel.
The extrusion pRoduction process ensures uniform coating application, with a wet film thickness of 38.9 microns and a coating precision of up to 0.1 microns. The stainless steel material ensures long-lasting durability, making it suitable for a variety of coating testing needs.
The ink wiping speed is 15.5cm/min, the opening area of the ink coating platen is 20cm ², and the ink absorption time is 120s. The test process is automatically controlled to accurately determine the absorption capacity and penetration performance of the paper to inks.
Using electric push Rod to drive Spreader movement, avoid manual Stability; equipped with touch screen real-time display of moving distance, support 2-200mm/s speed adjustment and 430 * 250mm effective coating area, Operating interface is simple and intuitive.
Adopting a wire-wound process, with a wet film thickness of 9.1 microns and a coating width of 300mm, it is suitable for ultra-thin coating requirements, offering high precision and ease of operation.
Wet film thickness 22.9 microns, diaMeter 9.52 mm, the forming Rod uses an extrusion process to process continuous grooves, with no wire breakage and easy cleaning; the wire-wound Rod is based on the traditional principle, and there are differences in coating amount.
