Measurement range 0-18mm, contact pressure 100kPa, contact area 200mm ², Indication Error 2.5μm, suitable for accurate measurement of paper and Cardboard thickness.
Equipped with 13 sub-disks and 1 master disk, the clamping thickness range is 0.1-1 mm, and the accuracy deviation is less than or equal to 0.01mm. It is suitable for Ring Crush Test testing requirements of different thickness papers.
Measurement range 0-4mm, contact pressure 100 +/- 10kPa, contact area 200mm ², with High Accuracy Indication Error +/- 0.0025mm, suitable for all kinds of sheet material thickness measurement.
Using electric pressure system and circular pressing operation mode, printing pressure 0-4mm, speed 0-100 Meters, adjustable scraper pressure and speed, support low accuracy overprinting and Color detection.
Measurement range 0-4mm, contact pressure 100 +/- 10kPa, contact area 200 +/- 5mm ², with High Accuracy Indication Error +/- 0.0025mm and stable parallelism ≤ 0.002mm, suitable for a variety of material thickness detection.
Measurement range 0.65-400 mm, the highest accuracy is +/- 0.04mm, supports four measurement modes, Data storage 3000 groups, high-speed measurement up to 10 times/second, suitable for a variety of metal materials.
The pressure of 0-700N can be adjusted to adapt to different substrates, the separate transfer system is easy to clean and maintain, supports the calculation function of inks transfer rate, and uses the middle ink extraction method to improve the lateral uniformity.
Hollow cylinder center aperture 65mm, maximum tension 600KN, manual pump high voltage 63Mpa, digital pressure Gauge direct reading tension value, compact structure and easy to carry.
Using electric pressure system, the printing pressure is adjustable from 0 to 2mm, the speed range is 0 to 80 Meters, low accuracy overprinting is supported, and the computer program control operation is stable.
Measurement accuracy of 0.007mm, Graduation of 0.001mm, probe diaMeter Φ 5mm, maximum measurement depth 45mm, suitable for on-site rapid thickness detection.
Provide an additional one-year warranty period, which is applicable to Coating thickness Gauge pRoducts. It needs to be purchased simultaneously when purchasing the equipment and is not sold separately.
Automatic test with microcomputer control, contact pressure 100 +/- 10kPa, contact area 200 +/- 5mm ², Measurement accuracy up to 0.001mm, suitable for continuous and accurate Film thickness determination.
Dedicated to Coating thickness Gauge calibrating, ensure accurate thickness measurement, suitable for F type equipment, improve Reliability.
Measurement accuracy of 0.007mm, Graduation of 0.001mm, probe diaMeter of Φ 5mm plane, maximum measurement depth of 80mm, in line with national standards.
Adopt servo electric printing pressure system, printing pressure 0-4mm automatic adjustment, printing speed 0-100 Meters can be set, support low accuracy overprint, simulate Gravure Printing drawdown blade Installation method, easy to detect inks.
