Wire-wound structure ensures 0.1 micron High Accuracy, wet film thickness 50.3 μm, stainless steel material is durable and easy to clean, and the wide-Rod Film Applicator achieves uniform coating.
Using the formed pRoduction process, the wet film thickness is 6 microns, the accuracy is 0.5 microns, the cleaning is convenient and there is no worry of broken wire, to ensure the precision and durability of the coating prepative.
Support bar and Drawdown blade double coating method, suitable for high, medium and low viscosity materials; coating speed 1~ 300mm/s stepless adjustable, Blade Coating accuracy +/- 3μm; equipped with innovative clamshell magnetic Drawdown blade and simple bar installation, easy to clean and load; Heating and Vacuum chuck function to improve Spreader mass.
Spreader 10 micron wet film thickness, diaMeter 10mm total length 60mm, 304 stainless steel material is easy to clean and unbroken wire.
Imported High Accuracy coating Rod, Spreader thickness range 1~ 571.5μm, accuracy +/- 0.003mm, speed 5~ 200mm/s, support Touchscreen control and a variety of customized functions.
The wire-wound process is employed, achieving a wet film thickness of 52.6μm, with a coating width of up to 300mm. A 50mm grip area is provided at both ends for ease of operation, and the stainless steel material ensures durability.
Using the formed pRoduction process, Coating Weight is about twice that of the wire-wound coating Rod, wet film thickness is 13μm, film accuracy reaches 0.5 μm, and the material is 304 stainless steel.
Using electric push Rod to drive Spreader movement, avoid manual Stability; equipped with touch screen real-time display of moving distance, support 2-200mm/s speed adjustment and 430 * 250mm effective coating area, Operating interface is simple and intuitive.
Adopting a wire-wound process, with a wet film thickness of 9.1 microns and a coating width of 300mm, it is suitable for ultra-thin coating requirements, offering high precision and ease of operation.
Wet film thickness 22.9 microns, diaMeter 9.52 mm, the forming Rod uses an extrusion process to process continuous grooves, with no wire breakage and easy cleaning; the wire-wound Rod is based on the traditional principle, and there are differences in coating amount.
The wire-wound process can pRoduce a wet film thickness of 96 μm with a coating width of up to 300 mm, utilizing stainless steel material to ensure durability and precise coating control.
Wet film thickness 137.2 μm, coating width 300 mm. The wire-wound structure enables the preparation of uniform coatings on both flat and easily raised substrates, while the two-end hand grip design facilitates even force distribution during operation.
Support bar and Drawdown blade two coating methods, suitable for different viscosity materials. Equipped with heating and Vacuum chuck function, servo motor to ensure stable operation. Drawdown blade film thickness control accuracy is high, uniform film.
Using 180 * 480mm size, with wire Rod or Film Applicator scraping ink, is conducive to the film flat and effective, improve film mass.
Employing an extrusion production process, the coating thickness is 105 microns, the coating width reaches 300 mm, and the coating accuracy can achieve 0.5 microns, ensuring coating uniformity and high-precision control.
