Cutting sample area of 100cm ², accuracy +/- 0.35, suitable for paper single or multi-layer 0.1-5 mm and ordinary Cardboard single layer < 6mm thickness, compact structure and labor-saving operation.
The circular cutter is designed with eight incisions and 1mm spacing between the teeth. It is suitable for strong substrate adhesion testing with a Coating thickness of less than 60 microns and meets the requirements of ISO 2409.
The sampling size of the equipment is 300 * 320mm, and the parallelism of the incision is less than or equal to 0.1mm. It can accurately detect the mechanical properties such as paper tension resistance, elongation and fracture length, and meets the requirements of many national standards.
The sampling area is 100mm ² and the error is controlled within +/- 0.35cm ², which can handle 0.1~ 1.2mm Film thickness materials. The circular sampling design is used to ensure the standard of the sample, and the operation is simple and the results are reliable.
Using irreversible discoloration technology, white turns black after overheating while displaying numbers, Measuring temperature 75 ° C, circular patch design is easy to observe temperature changes.
Pressure sensitive adhesive paste firmly, 65 ℃ single point temperature measurement accuracy, irreversible discoloration characteristics can permanently record the overtemperature state, circular design for easy observation, 2x2cm specification suitable for small space installation.
Using irreversible discoloration technology, temperature accuracy up to 120 ℃, circular 2x2cm size with Pressure sensitive adhesive firmly pasted, surface protective film to enhance durability, suitable for harsh Ambient Temperature Monitoring.
Fixed cut 15mm wide sample, sampling width error +/- 0.1mm, parallelism on both sides ≤ 0.1mm, suitable for a variety of paper test items.
Made of stainless steel, with 6 cutter teeth, the cutter tooth spacing is 2mm, which can provide a uniform cutting effect and is suitable for paint film adhesion testing.
The sampling area is 100cm ², the sampling thickness range is 0.1-1 mm, and the sampling error is +/- 0.35cm ². It is suitable for paper Basis Weight determination and sheet burst resistance test standard sample sampling.
Made of stainless steel, with 6 cutter tooth designs, with a cutter tooth spacing of 3mm, strong durability and stable cutting effect, suitable for accurate paint film testing requirements.
It can quickly and accurately cut the standard sample with a diaMeter of 125mm, and the sampling thickness range is 0.1-0. It is suitable for the determination of paper Water Absorbency and is a special tool for the preparation of laboratory standard samples.
Sampling area 100cm ² and error +/- 0.35cm ², removable knife edge sharp handle, with anti-cutting hand protection device, can handle Paper thickness 0.1~ 1.2mm and Corrugated Board 0.1~ 7mm.
The stamping design can cut the 15mm width sample, the parallelism of the two sides of the sampling is less than or equal to 0.025mm, and the width error is +/- 0.1mm, which meets the accurate sampling requirements of various physical performance tests of paper and Cardboard.
Sampling size Φ 125mm error +/- 0.2mm, thickness range 0.1~ 2.0mm, suitable for paper Cardboard surface water absorption weight detection, easy operation and high accuracy.
