Sampling thickness range 0.1~ 1.2mm, folding stiffness 70x38mm, crease stiffness 36x38mm, parallelism on both sides ≤ 0.015mm, suitable for stiffness testing.
It can cut 70 × 38 and 38 × 36 samples, and the sampling thickness range is less than or equal to 1mm. It is suitable for special sampling equipment for stiffness and crease detection, and is used with a variety of stiffness Meters.
It can measure the anti-bending stiffness of the material with a thickness of 0-3mm, the test angle is adjustable from 1-90 °, supports 6 kinds of bending lengths and 3-30 seconds time settings, adopts digital motor control and displays the stiffness time in real time Linear dispersion.
Using 70 * 38mm standard sampling size, the thickness range covers 0.1-1 mm, the parallelism of the two long sides is controlled within 0.015mm, and the crease stiffness sampling size is 38 * 36mm, which improves the accuracy of the stiffness test data.
The punching sampling method ensures accuracy, the sampling size error is controlled within 0.1mm, and two specifications of 70 * 38mm stiffness and 36 * 38mm crease stiffness are supported.
The bearing with accurate guidance and reasonable fulcrum structure, good sampling Repeatability, can handle materials with a thickness of 0.1-1 mm, support 70 * 38mm fold stiffness and 38 * 36mm crease stiffness two sizes, long side parallelism ≤ 0.015mm.
Angle 1-90 degrees adjustable, test time 3-35 seconds can be set, Measurement range 15-10000mN.m, equipped with 5.7 inch LCD real-time display stiffness time Linear dispersion, support automatic zero adjustment and Data analysis.
The stamping sampling method is accurate and convenient, the quenching tool is resistant to abrasion, the sampling error is +/- 0.2mm, the sampling thickness range is 0.1-1 mm, and the special treatment blade can be used normally for 10 years.
Angle 1-90 ° adjustable, test time 3-35s can be set, Measurement range 15-10000mN.m, real-time display of stiffness time Linear dispersion, automatic zero adjustment and thermal printing function.
Adopt back heating and horizontal forced convection technology to ensure uniform temperature in the studio; Temperature control accuracy up to 0.1 ° C, Fluctuation +/- 0.5 ° C; Sensor fault alarm and over-temperature protection function, Timer Range 0-9999 minutes.
Adopt back heating structure and horizontal forced convection technology to ensure studio Temperature uniformity. Equipped with High Accuracy Platinum Resistance Sensor, Temperature Fluctuation is only +/- 0.5 ° C, supports 0-9999 minutes timing function, and has multiple Safety protection mechanisms.
It can measure three different angles at the same time, the angle range is adjustable from 1-92 °, the Measurement range is 0-10000mN, and it supports a variety of material tests with bending length and thickness 0.01-5 mm. It has automatic reset and self-Adjustment.
Measurement range 20~ 10000mN, with 6 kinds of bending length selection and 1~ 90 ° angle setting function, automatic control to improve measurement efficiency.
Measurement range 1-30N, accuracy +/- 1%, using High Accuracy Force Sensor and precision screw drive system, Repeatability of test results, equipped with calibrated probe pad for easy Measurement calibrated, can be connected to computer display Linear dispersion.
Measurement range 0~ 20N, resolution 0.01N, with movable bench lifting function and thermal print output, support anti-pressure-deformation Linear dispersion real-time display.
