The single-arm double-column structure is equipped with an electric lifting device, with a drop height range of 300-1500mm, a test load of 0-80kg, and a buffer device to improve service life and stability. The height error does not exceed 2%.
The single-arm double-column structure is used to realize the free drop of the face corner, and the height tracking system is equipped to make the drop height error not exceed 2%. The buffer device improves the service life and safety of the equipment.
Adopt built-in double column structure, support 500N maximum load and 0-500mm/min stepless speed regulation, with force holding function, four test modes and automatic counting Timing function, equipped with limit protection device to ensure safe operation.
Adopt double column structure to ensure stability, rated load up to 5000N, test speed range 1-240mm/min, with stepless speed regulation and manual automatic switching function, support Force Gauge and software data collection.
With four test modes and automatic programming function, the maximum Measured value 1000N, speed range 10-800mm/min, equipped with limit protection and force holding function, support pull and break stop and set force value round-trip movement.
Using stepper motor and High Accuracy encoder, displacement accuracy of +/- 0.1mm, speed range of 10-800mm/min, with four test modes and force holding function, support fully automatic programming test.
Adopt low-noise stepless speed regulation motor, with a speed range of 0-500mm/min, with force holding function and four test modes, equipped with limit protection device, support pull-off stop and set force value round-trip motion.
Double guide Rod structure ensures Stability, Maximum load 2000N, Effective Travel 400mm, Support pull off stop, force value maintenance, fatigue test and other functions, stepless speed range 0-500mm/min.
Adopt low-noise stepless speed regulation motor to automatically load, with a maximum load of 1000N and a speed range of 0-500mm/min. It has the functions of pulling and breaking and stopping, force holding and round-trip movement to ensure accurate and safe testing.
Using high-torque stepper motor and High Accuracy encoder, the speed range is 10-800mm/min, effective Travel 385mm, supports displacement control and force holding functions, and is suitable for a variety of test modes.
Adopt double guide Rod structure to ensure Stability, Maximum Measured value 5000N, Travel 220mm, support stepless speed regulation and a variety of test modes, with pull-off stop and force retention functions.
Using high-torque stepper motor and High Accuracy encoder, effective Travel 385mm, speed range 10-800mm/min, equipped with 7-inch Touchscreen, support for displacement control, force holding and various test modes.
Single person single-sided vertical quasi-closed structure effectively prevents external gas induction, adjustable air volume system maintains 0.25~ 0.6m/s wind speed, equipped with double suspended Glass doors and convenient maintenance design.
It adopts double guide rod structure, is equipped with dual screen display and the interface can be flipped 180 degrees. It supports pull-and-break stop, force value maintenance and set force value round-trip movement, can store 200 sets of data and automatically calculate statistical values.
Adopt vertical double air duct vertical hot air circulation, temperature control accuracy +/- 1.0 ℃, Temperature resolution 0.1 ℃, with timing and over-temperature alarm function, turbine centrifugal fan blade with bottom drum and bottom heating to ensure Temperature uniformity.
