Suitable for medium hard resilience, rubber or microporous materials, Measurement range 0-100HE, more suitable for thinner or curved samples, can be used with handheld or supporting bench.
Measurement range 20-90HC, resolution 1HC, Indication Error ≤ +/- 1HC, suitable for microporous hardness of materials testing.
The pressure spring constant linear relationship, pressure needle Travel 0-2.5 mm, measurement error +/- 1HC, can be hand-held or installed measuring frame, suitable for shoe microporous hardness of materials testing.
The pressure spring is used to achieve a constant linear relationship, the pressing needle Travel 0-2.5 mm, measurement error +/- 1HC, can be used in hand or installed on the measuring rack, suitable for the test of microporous materials for shoes.
Equipped with dedicated host computer software to realize data storage analysis, support peak mode and automatic Timing function, Measurement range 20-90HC, resolution 0.1HC, with a variety of coordinate Linear dispersion display and qualified judgment ability.
Measurement range 0~ 100HC, error +/- 1HC, suitable for the detection of microporous materials with stress above 0.049MPa when the compression rate is 50%.
Suitable for medium Hardness Rubber and Plastic, Measurement range 0-100HC, resolution 0.1HC. Measurement modes of real-time, peak, automatic timing and average value can be connected to computer for data Linear dispersion analysis and storage.
With average value calculation and MAX Maximum latch function, support a variety of data output methods, Measurement range 10HA~ 90HA, resolution 0.1H, suitable for soft plastic, sponge and other hardness of materials detection.
Can be used with A type or C type Shore DuroMeter, fixed load weight mass 0.75 +/- 0.05kg, hardness Gauge clamping Rod connection size M7x0.5mm, improve hardness testing accuracy and Stability.
Suitable for the determination of materials with high Hardness, Measurement range 20-90HD, Indication Error ≤ +/- 1 HD, using Dial display, easy to operate, suitable for rubber and plastic and microporous materials.
Travel 0-2.5 mm, measurement error +/- 1HA, can be used with a rack or hand-held operation to meet the requirements of standard test pieces and field object Hardness measurement.
Suitable for low Hardness Rubber and Sponge Determination, Measurement range 20-90HAO, Indication Error ≤ +/- 1HAO, Portable design for quick field testing.
Travel range of the crimp is 0~ 2.5mm, measurement error is +/- 1HAO, and the end pressure of the crimp is 0.55~ 8.05N, which is suitable for accurate Hardness detection of low Hardness rubber materials.
Suitable for soft rubber, thermal plasticity resilience and extremely soft plastics, Hardness Measurement range < 20 HDO, with real-time, peak, timing and average Measurement mode, can be connected to the computer for data management and analysis.
Pin Travel 0~ 2.5mm, Measurement range 0~ 100HA, error +/- 1HA, can be used in the matching measuring rack or handheld, to meet a variety of rubber hardness testing needs.
