The vacuum pressure plate is made of pure bronze, the drying temperature can be adjusted from room temperature to 120 ℃, equipped with double drying stations and intelligent drainage system, and the paper uniformity can reach 96.
Three-stage centrifugal Vacuumpump to achieve -0.092~ -0.098MPa high negative pressure, drying Film thickness up to 10mm, with electric homogenization and vacuum pressing function, no maintenance and adapt to harsh environment.
The equipment adopts international standards, the papermaking diaMeter is 300mm, the capacity is 8 liters, and it is equipped with manual pulp plate and optional vacuum papermaking function.
Vacuum chuck area of 300 * 400mm, equipped with 150W vacuum pump, aperture 0.8mm to ensure uniform adsorption, improve Spreader accuracy and Stability.
Spreader movement driven by electric push Rod, adjustable speed range of 2-200mm/s, equipped with Vacuum chuck table to effectively fix the substrate, Operating interface intuitively simplifies the process, improves Spreader accuracy and efficiency.
Adopt electric push Rod to drive Spreader movement, adjustable speed range of 2-200mm/s, temperature accuracy +/- 3 ℃, support Vacuum chuck and electric heating function, improve Spreader uniformity and operation convenience.
Adopt bar and drawdown blade composite coating method, bar accuracy +/- 0.005mm, drawdown blade thickness range 0.1-10 mm, Vacuum Area 1280 * 960mm, coating speed 1~ 300mm/s stepless speed regulation, suitable for wide voltage input.
Spreader accuracy +/- 0.003mm, Spreader thickness range 0.001~ 10mm adjustable, with Vacuum chuck and heating function, support bar and drawdown blade two coating methods to ensure Spreader uniformity and repRoducibility.
The rectangular vacuum Chamber improves space utilization, Vacuum Level up to 133Pa, is equipped with double-decked tempered Glass doors for easy observation, supports program control of heating and vacuum holding time, and improves processing conformity.
The built-in vacuum pump realizes 0~ -80kPa Vacuum Level, the fully transparent vacuum Chamber can hold 12 samples, the program control supports 80 sets of paraMeter storage, and the vacuum cycle operation is automatically completed.
Adopting the national standard, the papermaking diaMeter is 200mm, and it is equipped with manual pulp board and vacuum papermaking functions, which can prepare laboratory paper samples that meet various international standards.
Using platinum sheet material, Conductivity Detector cell constant 0.1, no temperature compensation function, suitable for pure water and ultra-pure water and other water quality measurement, optional Glass flow Tank.
Using platinum sheet material, Conductivity Detector cell constant is 1, Measurement range covers 2.0~ 200 µS/cm, suitable for conventional water detection, interface is three-core socket, no temperature compensation function.
The effective volume utilization rate of rectangular vacuum Chamber is high, each layer can be independently heated and vacuumed to inject nitrogen without interfering with each other, the temperature control accuracy is +/- 1 ℃, the Vacuum Level is 133Pa, and the double-decked tempered Glass door is easy to observe.
With programmed vacuum cycle control, the maximum number of cycles is 99 times, and the drying time is shortened by more than 50% compared with the traditional method; equipped with a digital vacuum Gauge, the control accuracy is +/- 1% to ensure a stable vacuum environment.
