Using magnetic Induction and eddy Current principle simultaneous measurement composite coatings, Measurement range 0~ 1500μm, error +/- 1%, can display a single coating and zinc layer thickness, suitable for the accurate detection of ferrous and non-ferrous substrates.
Provide an additional one-year warranty period, which is applicable to Coating thickness Gauge pRoducts. It needs to be purchased simultaneously when purchasing the equipment and is not sold separately.
Measurement range 0~ 1250μm, suitable for LEEB220 and LEEB222 Coating thickness Gauge, Abrasion Resistance is good, suitable for a variety of nonmagnetic Coating thickness detection.
Dedicated to Coating thickness Gauge calibrating, ensure accurate thickness measurement, suitable for F type equipment, improve Reliability.
Wound wire design, wet film thickness 125.7 microns, coating width 300 mm, stainless steel material ensures durability and precise coating effect.
Utilizing a wire-wound design, it controls the wet film thickness with a 0.61mm steel wire diaMeter, features a coating width of 300mm, and is constructed from durable stainless steel.
Wet film thickness 68.6μm, coating width 300mm, pRoduced using a wire-wound process, with stainless steel material ensuring durability and precise coating performance.
Utilizing a wire-wound process, with a wet film thickness of 91.4 μm, a coating width of 300 mm, and durable stainless steel construction, the wire diaMeter of 1.02 mm ensures uniform coating, making it suitable for various surface treatments.
Using a wire-wound coating process, with a wet film thickness of 32.0 μm and a coating width of 300 mm, it is suitable for substrates prone to curling and convexity, enabling uniform wet film coating, with a wire diaMeter of 0.36 mm.
A wet film of 100.6 microMeters was prepared using a wire-winding process, with a coating width of 300 mm. The film thickness was precisely controlled using a steel wire with a diaMeter of 1.12 mm, and the extrusion process eliminated the need for wire winding.
The wire-wound design allows for precise control of a 86.9-micron wet film thickness, utilizing durable stainless steel material, with a coating width of up to 300 milliMeters, making it suitable for high-precision coating preparation.
The wire-wound design ensures uniform coating application, with a wet film thickness of 109.7 microMeters and a coating width of up to 300 milliMeters, making it suitable for surface treatment on a variety of substrates.
Using a wire-wound process, the wet film thickness is 27.4 μm, with a coating width of 300 mm and a total length of 400 mm. The stainless steel material ensures durability and precise coating results.
Using wire-wound process, wet film thickness 12 μ m, application width 220mm, through precision winding stainless steel wire to form a uniform groove, to achieve precise and controllable Coating thickness.
The precision drawing stainless steel wire winding process is used to form uniform grooves to control the Coating thickness, the wet film thickness reaches 120μm, and the application width is 220mm to ensure the accuracy and repeatability of the coating.
