Using 180 * 480mm size, with wire Rod or Film Applicator scraping ink, is conducive to the film flat and effective, improve film mass.
Wire-wound structure ensures 0.1 micron High Accuracy, wet film thickness 50.3 μm, stainless steel material is durable and easy to clean, and the wide-Rod Film Applicator achieves uniform coating.
The wet film thickness is 22.9 microns, the application width is 300mm, the stainless steel material is used, the forming Rod is processed by extrusion process, the continuous wire is easy to clean, and the wire-wound drawdown bar is widely used based on traditional principles.
A groove control film is formed on the smooth Rod body by extrusion process. The wear-resistant stainless steel material is not easy to break the wire and is easy to clean. The wet film thickness is 105.2 μ m and the application width is 300mm.
Wire-wound molding process, wet film thickness of 80 microns, effective application width of 25.5 cm, can be used at the same time Spreader a variety of Coating comparative experiments, with Drawdown Plate use effect is better.
Glass material is conducive to film flatness, size 230 * 340mm, with wire Rod or Film Applicator for scraping operation is more effective.
Using wire-wound stainless steel wire structure, the film thickness is 100 microns, the total length is 375mm, and the application width is 255mm to ensure that the Spreader is uniform and firm, suitable for precision experimental operation.
Manufactured using a wire-winding process, with a wet film thickness of 41.1 μm and a coating width of 300 mm. Made of durable stainless steel, it is suitable for preparing thin coatings on various soft materials.
Glass material ensures that the film is flat, used with wire Rod or Film Applicator, the specification size is 110 * 180mm, and the operation is simple and efficient.
Wire-wound structure can be prepared with different thickness wet-film, wet-film scale accuracy of 1 micron, total length of 37.5cm with Drawdown Plate is more convenient to use.
Wire-wound process to achieve 40μm wet film thickness, one operation can simultaneously Spreader two or more Coatings, matching Drawdown Plate to improve Spreader repRoducibility, suitable for soft to strong all kinds of substrates.
Wire-wound design wet film thickness 11.4μm, wire diaMeter Φ 0.13mm, not easy to block and easy to clean, suitable for a variety of substrates, to achieve uniform Spreader and flexible thickness adjustment.
Using a formed pRoduction process, the wet film thickness is 20.6 μm, the accuracy is 0.1 μm, the non-wire-wound structure is easier to clean and the filament is not broken, and three diaMeters are provided to adapt to different usage habits.
Spreader accuracy of +/- 0.003mm, rate 5~ 180mm/s adjustable, equipped with Vacuum chuck and heating function to 180 ℃, ensure uniform and stable film, easy to clean and replace drawdown blade.
Wet film thickness 22.9 microns, diaMeter 9.52 mm, the forming Rod uses an extrusion process to process continuous grooves, with no wire breakage and easy cleaning; the wire-wound Rod is based on the traditional principle, and there are differences in coating amount.
