Measurement range 0~ 1250μm, suitable for LEEB220 and LEEB222 Coating thickness Gauge, Abrasion Resistance is good, suitable for a variety of nonmagnetic Coating thickness detection.
Driven by stepper motor, Rotation speed 60/70 +/- 2/min, double abrasive wheels mesh friction design eliminates directionality and improves test objectivity and comparability.
The 2850mm sand guide tube and 850μm filtrate net are used to control the falling sand, the calibration funnel can adjust the uniformity of the sand volume, and the sample holder can freely adjust the height and horizontal direction to ensure the Test accuracy and Reliability.
Using reciprocating motion to simulate transportation abrasion, Friction Frequency 0~ 2.5Hz adjustable, Test Travel 12.7~ 50.8mm, support continuous test 0~ 24 hours, suitable for a variety of can sizes and pressure conditions.
Rotation speed is stable with stepper motor drive, Rotation speed is adjustable from 0 to 90rpm, support a variety of standard tests, avoid friction directional defects, and make the evaluation more objective.
Can test inks multi-directional adhesion at the same time, Friction Frequency 43cpm, Friction Load 2lb/4lb, Abrasion Resistance evaluation by measurement density or Coating thickness reduction, support 0-99999 automatic shutdown.
With four adjustable friction Frequency 21/43/85/106cpm, friction load 20N, support linear reciprocating friction movement, power-off memory function to ensure that paraMeters are not lost, effective analysis of coating adhesion and wear resistance performance.
Scruf Travel 20-300mm adjustable, speed range 1-60cpm, equipped with TFT full color display and intelligent Operating interface, supports manual testing and is compatible with a variety of standard accessories, suitable for coating Abrasion Resistance evaluation.
Adopt reciprocating friction method, Friction Frequency 0~ 2.5Hz, Test Travel 12.7~ 50.8mm, can simulate coating abrasion during transportation, support continuous test 0~ 24 hours.
Scruf Travel 20-300mm adjustable, with +/- 1% speed accuracy, equipped with TFT display and intelligent Operating interface, supports multiple languages and accessories expansion.
It has two LISHARU graphic motion track test modes, supports 60 × 40mm moving range, adopts 4 grinding head design, and the non-turning guide plate is convenient for sample loading operation.
Stepper motor is used to avoid voltage fluctuation affecting Rotation speed Stability, double abrasive wheels mesh friction design eliminates directional defects, and programmable control adapts to different test requirements.
Rotation speed is stable with stepper motor drive, working wheel Rotation speed 60/70rpm adjustable, support a variety of material testing, eliminate directional defects through double abrasive wheels mesh friction, improve test objectivity.
Using standard sand free fall brushing layer, straight grinding to expose 4mm substrate; can quantify the abrasion per unit thickness of the paint layer of sand volume, the inner diaMeter of the catheter 19mm, sample holder 45 degrees angle fixed.
Can set the moving distance 0.5-4 inches, Rotation speed 2-60 times/min and other paraMeters, support wet and dry abrasion test, can test any size or shape sample, ensure test Stability and accuracy.
