Measurement range 0-500mg/L, accuracy 1mg/L, Repeatability 3%, support AC and DC power supply and automatic shutdown, suitable for a variety of liquid suspended matter detection.
The imported cold light source does not need to be preheated for 100,000 hours, the minimum display value is 0.001mg/L, supports standard measurement and continuous measurement modes, and the built-in large-capacity lithium battery realizes long standby, which can store 4000 sets of measurement data.
Imported Illuminant and narrowband filter system, Optical inspection stability, high accuracy; measurement range 0-1000mg/L, repeability +/- 2% F.S; Large screen Chinese display, easy to operate without Reagent.
Measurement range 0~ 2000 NTU, Accuracy +/- 2%, support TSS conversion and 200 data storage, password protection and continuous measurement function.
Colorimetric integrated tube design is adopted, sample digestion and detection share a tube, no need to transfer liquid; support more than 10 measurements and automatically remove abnormal values to average, error ≤ +/- 5%; can expand the detection of COD, ammonia nitrogen and other paraMeters.
Accuracy up to 1mg/L, Measurement range 0-500mg/L, support AC and DC dual power supply and automatic shutdown function, Repeatability 3%, Linearity +/- (5% FS + 1 word) to ensure stable and reliable measurement.
Colorimetric integrated tube design, supports more than 10 measurements to take the average value, measurement error ≤ +/- 5%, built-in 30,000 data storage and thermal printer, can expand the detection of ammonia nitrogen, total nitrogen and other paraMeters.
Supporting D-type Shore DuroMeter, applying 5kg test force by weight, equipped with Glass bench and adjusting nut to ensure full contact with the sample and improve measurement Stability.
Four-channel configuration with K-type Thermocouple, the sampling rate can be adjusted from 1 second to 1 minute, and the thermal insulation performance can last for 60 minutes in a 500 ° C environment to achieve full temperature tracking monitoring.
Can be used with A type or C type Shore DuroMeter, fixed load weight mass 0.75 +/- 0.05kg, hardness Gauge clamping Rod connection size M7x0.5mm, improve hardness testing accuracy and Stability.
Using S-type Sensor structure, Measurement accuracy of +/- 0.5%, with 10 data storage and automatic calculation functions, support for automatic conversion of N/kgf/lbf units, peak hold and automatic release functions can be freely set time.
Using S-type external Sensor, Measurement range 10%~ 100% FS, Indication Error less than +/- 0.5%, with peak hold and automatic unit conversion function, support Data storage and sound and light alarm settings.
The dual-channel interface can connect two Probes at the same time, support K-type -200~ 999.9 ℃ wide range, with low power error-proof system and data locking function, waterproof design to adapt to a variety of environments.
High Accuracy S type sensor accuracy of 0.5%, range 0-10KN, with pull-off automatic stop function, three operation modes optional, can directly enter the test block area display force value and strength value
Adopt DSP chip to realize fast data processing, support Multi-ParaMeter measurement such as Ra, Rz, etc., equipped with TYPE C and Bluetooth interface for data transmission, Continuous Operating Time exceeds 20 hours, and stores 100 sets of data.
