In-Tank stirrer

The in-barrel stirrer drives the blades to rotate through a motor, causing forced convection of the liquid or semi-fluid inside the barrel to achieve uniform mixing, prevent sedimentation, or accelerate reactions. It is commonly used in industries such as coatings and inks for sample preparation, quality control, and process operations.
Selection
When selecting a barrel stirrer, it is essential to consider the viscosity of the material to match the blade type, determine the shaft length based on container dimensions, adjust the speed range according to process requirements, adapt to the working environment by combining explosion-proof ratings and material corrosion resistance, and simultaneously pay attention to the correspondence between motor power and load capacity.

Terms

Instruments

Temperature control range -10~ 95 ℃, accuracy up to +/- 0.05 ℃, equipped with 6L/min circulating pump to ensure uniform temperature, Tank volume 7.5L to meet the needs of multi-sample testing.

$ 1429.00

With heating and cooling functions, Temperature range -20~ 100 ℃, Fluctuation +/- 0.05~ 0.1 ℃, can be 10-stage program control, to achieve timing thermostatic, heating and cooling.

$ 1372.00

Heating power 800W, speed range 0-2600 rpm, support vacuum reaction and pressure reaction for a long time stirring, with durable magnetic steel and PTFE stirrer.

$ 209.00

Temperature range -20~ 95 ℃, temperature accuracy +/- 0.05 ℃, Tank volume 15L, equipped with 6L/min circulating pump to ensure uniform and stable temperature, suitable for a variety of experimental needs.

$ 1726.00

With three uses of water Bath, thermostatic and boiling disinfection, Temperature range RT +~ 100 ℃, Tank volume 36L, suitable for a variety of experimental heating and equipment processing needs.

$ 209.00

Water Bath, water temperature box and boiling disinfection box three functions, Temperature range from room temperature to 100 ℃, Tank size 42 * 18 * 20cm, to meet a variety of experimental heating and disinfection needs.

$ 180.00

Air-Cooled fully enclosed Compressor and overall foaming process, high cooling efficiency and good insulation performance, Temperature range of -40~ 95 ℃, Tank size of 300 * 240 * 150mm.

$ 3599.00

Temperature range -40~ 95 ℃, temperature accuracy +/- 0.1 ℃, Tank volume 15L, providing uniform and constant temperature field source, suitable for a variety of test needs.

$ 2936.00

Using 300mm × 300mm stainless steel inner Tank, equipped with heating temperature control function, support timing operation and drawer sample stage, to ensure safe and efficient cleaning process.

$ 9433.00

Temperature range -10~ 95 ℃, using Air-Cooled fully enclosed Compressor, high cooling efficiency, low noise, the inner Tank is made of stainless steel, good thermal insulation performance.

$ 2426.00

DC brushless motor design, Rotation speed 0~ 2000rpm, put in the stirrer without hopper; double-decked thermal insulation structure, rapid heating and prolong the life of the host; built-in over-temperature protection device, safe and reliable use.

$ 222.00

Temperature range -20~ 95 ℃, using Air-Cooled fully enclosed Compressor, efficient and fast cooling, low noise and less vibration, the inner Tank is made of stainless steel, and the thermal insulation performance is good.

$ 1676.00

Temperature range -5~ 95 ℃, accuracy +/- 0.05 ℃, Tank volume 15L, pump flow 6L/min, providing uniform and constant temperature field source, suitable for a variety of test needs.

$ 1505.00

Tank size 420 × 180 × 135mm, temperature control accuracy +/- 0.5 ℃, stainless steel sink and cover, electronic temperature control is stable and reliable, suitable for a variety of laboratory thermostatic treatment.

$ 162.00

Temperature range up to 300 ℃, Tank volume 36L, using domestic circulation design to ensure temperature uniformity, suitable for a variety of experimental operations.

$ 548.00