Two Operating Modes, point and continuous, fixed speed up to 3000rpm, track diaMeter 4mm, compact and lightweight only 3.5kg, engineering plastic shell corrosion resistance, stable operation.
Measured value 500N, suitable for tape, PCB, adhesive tape and other materials disbonding force test, supporting the Force Gauge test bench.
Three cutting methods are available, with a maximum cutting diaMeter of 30mm. It is equipped with a 7-inch Touchscreen and a fully enclosed safety protection structure. The work surface is made of stainless steel, and fast clamps and vertical clamps are provided to meet different sample clamping needs.
Ultra-small portable design can be put into the pocket, equipped with protective rubber cover to prevent falling; the use of a No. 5 battery can continuously measure tens of thousands of sets of data, that is, there is no need to wait for the test; the use of special microcomputer control to eliminate external light interference, to ensure 0.1% resolution High Accuracy measurement.
Using 60 ° Measurement Angles and 0~ 199.9GU Measurement range, with 10 * 20mm Measuring Area and +/- 1.2GU Indication Error, the whole set of instruments is designed in one piece and the measuring port has anti-scratch coating.
Equipped with three anti-skid wheels and carbide stylus, horizontal movement of 12 test values, automatic statistics of time, date and position data, built-in Storage capacity 4000 values, compact portable one-handed operation.
Employing an extrusion production process, the coating thickness is 105 microns, the coating width reaches 300 mm, and the coating accuracy can achieve 0.5 microns, ensuring coating uniformity and high-precision control.
Film speeds are adjustable from 1 to 150mm/s for A4 size charts. Equipped with replaceable Glass or perforated vacuum beds, compatible with standard block and spiral bar film applicators, Operating interface is simple and intuitive.
Hollow self-resetting structure, maximum pulling force 10kN, piston Travel 25mm, with 100 data storage and peak hold function, compact and portable structure.
The equipment can detect the crazing or peeling of the putty film after bending, equipped with R25 and R50 support film specifications, shaft Rod size is 50mm and 100mm in diaMeter, suitable for 0.2-0. 3mm thick tinplate plate.
Maximum load 0.5KN, compact structure, reliable clamping, suitable for a variety of small sample testing, easy to operate.
Maximum load 0.5KN, compact structure, stable clamping, easy to operate, suitable for a variety of material testing scenarios.
Using the formed pRoduction process, Coating Weight is about twice that of the wire-wound coating Rod, wet film thickness is 13μm, film accuracy reaches 0.5 μm, and the material is 304 stainless steel.
Spreader 13 micron wet film thickness, application width up to 300mm, 304 stainless steel for durability and precise coating control.
Adjustable application width, with automatic Spreader function, easy to operate, Repeatability is good, suitable for a variety of samples of laboratory prepative.
