The four-sided design allows for the preparation of film thicknesses of 200μm, 400μm, 600μm, and 800μm. Made of stainless steel, it offers high coating precision, a compact size, and is suitable for various substrates and coatings with different pH levels.
The 4-sided coating Applicator can be prepative of four wet film thicknesses, the accuracy is +/- 3μm, the application width is 80mm, the stainless steel material is resistant to corrosion, and the operation is simple only need to change the angle.
The 4-sided coating Applicator can be prepative of four wet film thicknesses, the conversion angle is easy to operate, the accuracy is +/- 3μm, the stainless steel material is resistant to acid and alkali erosion, and the application width is 80mm.
Film thickness range 650~ 875 μ m, Graduation 25 μ m, stainless steel material, Dimension 120 * 22 * 20mm, suitable for the determination of relative sag of Paints.
The 4-sided design can simultaneously prepative four Film thicknesses, accuracy up to +/- 2μm, using 9Cr18Mo high Hardness stainless steel material, Hardness value 50~ 55HRC, Spreader width 160mm, to ensure experimental conformity and Repeatability.
The 4-sided film design can be prepared with four thicknesses at one time, the accuracy is up to +/- 2μm, and it is made of high-Hardness stainless steel, with a Hardness of 50~ 55HRC and an effective application width of 100mm to ensure experimental Repeatability and durability.
The 4-sided design can convert the angle to obtain four wet film thicknesses, the accuracy is +/- 3μm, the stainless steel material is resistant to acid and alkali corrosion, and the conductive smear is removable for easy cleaning and maintenance.
4-Sided design can be prepared with four film thicknesses of 25μm, 50μm, 75μm and 100μm, application width 80mm, stainless steel material, suitable for water-based, acidic and alkaline pRoduct films.
The integrated design can convert four film thicknesses, the accuracy is +/- 3μm, the stainless steel material is resistant to corrosion, and the conductive film can be removed for easy cleaning and maintenance.
The 4-sided design can be prepared with four wet film thicknesses, and the conversion angle is easy to operate; the stainless steel material is resistant to acid and alkali corrosion, and the conductive film can be disassembled; the application width is 60mm, and the accuracy is +/- 3μm to ensure the accuracy of the test.
With four film Film thickness, Spreader width 160mm, wear-resistant corrosion-resistant alloy steel material, can precisely control wet-film or dry-film thickness, ensure coating conformity and Repeatability.
A wet film with a film thickness of 50~ 675 μ m was prepared by using a coating scraper, and the sag property was observed when placed vertically. The maximum thickness without sag was expressed, which was suitable for Paints testing.
The 4-sided design can convert the angle to obtain four wet film thicknesses, the application width is 60mm, the accuracy is +/- 3μm, the stainless steel material is resistant to acid and alkali corrosion, and the guide film can be removed for easy operation and maintenance.
With four film film thickness 30/60/90/120μm, Spreader width 160mm, wear-resistant corrosion-resistant alloy steel material, can accurately control the Coating thickness, ensure good conformity Repeatability.
With four films Film thickness 50/100/150/200μm, Spreader width 160mm, wear-resistant corrosion-resistant alloy steel material, can accurately control wet-film or dry-film thickness, to ensure coating conformity and Repeatability.
