Film Film thickness 22.9μm, Spreader width 30cm, wear-resistant stainless steel material, molding process, suitable for low viscosity glue and thermal glue experimental Spreader.
The formed pRoduction process ensures that the film is uniform, the film thickness is 22.9μm, the application width is 300mm, which is suitable for low viscosity glue experiment, and the material is wear-resistant stainless steel to prolong the service life.
Using 470nm wavelength and double-sided LED Illuminant irradiation, equipped with amber filter and 105 * 163mm glue cutting area, accurate fluorescence sample separation operation can be achieved.
Using double-sided LED Illuminant and 400nm wavelength, equipped with amber filter, the glue cutting area is up to 105 * 163mm, which is convenient for accurate separation of fluorescently labeled nucleic acid protein samples.
Using 365nm wavelength double-sided LED Illuminant, equipped with amber filter, the glue cutting area is up to 105 * 163mm, which can clearly observe the fluorescence and accurately separate the target area.
Using formed process, film thickness 29.7 μ m, diaMeter 9.52mm, total length 400mm, application width 300mm, stainless steel material, no wire-wound design.
Multi-color superposition sampling and color development at the same time, sampling can be done without boot printing, anilox roller adopts metal rubber roller structure, color development rubber roller Hardness 75 °, high processing accuracy and small amount of glue.
High Hardness stainless steel material, Hardness of 50~ 55HRC, accuracy control in +/- 2 microns, smooth surface and support non-standard customization, can be used with automatic Film Applicator.
Hardness stainless steel material, Hardness of 50~ 55HRC, film accuracy +/- 2μm, smooth surface to support a variety of Spreader requirements, can be used with Film Applicator to achieve automatic film operation.
Using slot-die coating method, application width ≤ 500mm, thickness range 10-250μm; equipped with automatic deviation correction and constant tension system, Oven temperature RT +~ 160 ℃, support segmented thermostatic, ensure Spreader accuracy +/- 3 microns.
Spreader thickness range of 10-250μm, Dry-Film accuracy of +/- 3 microns, equipped with automatic constant tension control and four Oven section thermostatic, ensure uniform and stable Spreader, Oven with waste heat recovery system energy saving about 30%.
Using the formed pRoduction process, the wet film thickness is 6 microns, the accuracy is 0.5 microns, the cleaning is convenient and there is no worry of broken wire, to ensure the precision and durability of the coating prepative.
Spreader width 100mm, wet film thickness 50μm, wear resistant corrosion resistant alloy steel material, suitable for manual or automatic Film Applicator, can be prepared uniform film for performance testing.
High Hardness stainless steel material, Hardness 50~ 55HRC, film accuracy +/- 2μm, wear-resistant and corrosion-resistant, smooth surface, support custom specifications, three-coordinate inspection to ensure accuracy.
Using metal plating anilox roller, the number of lines can reach 180 lines/inch, which can precisely control the film fineness, and is suitable for the uniform Spreader test of inks Coating glue on various substrates.
