The equipment integrates stirring, dispersing, grinding functions, motor Power 750W, speed range 60~ 8000rpm, can handle materials with a viscosity of 100000mPa.s, through high-speed swirl/spin to generate strong shear force to achieve efficient Mixing & dispersing.
Speed range 0~ 20000rpm wide adjustable, equipped with high-speed series motor and stable silicon control system, integrated photoelectric speed measurement to ensure accurate reading, compact structure and convenient operation.
Set stirring, dispersing, grinding three functions in one, motor Power 750W, processing viscosity of 100000mPa.s, using frequency control to achieve 60-8000rpm stepless speed regulation, through high-speed swirl/spin to pRoduce strong shear effect to achieve efficient mixing.
Adopt thyristor high-speed adjustment system, photoelectric speed measurement electronic circuit to ensure reliable Rotation speed, homogenization knife Speed range of 22000rpm, Processing capacity 1000ml, easy to operate and intuitive reading.
Using 750W Motor Power, the speed range is 60-8000rpm, which integrates the three functions of stirring and dispersing grinding, and generates a strong shear force through high-speed swirling/spinning to achieve efficient Mixing & dispersing effect.
With a wide speed range of 0~ 10000rpm and 280mm lift Travel, using frequency conversion electromechanical operation quiet noise, support high-speed dispersion, stirring and grinding functions, suitable for 0~ 2L Processing capacity.
Driven by a series-excited high-speed motor, the maximum Rotation speed is 28000rpm, Processing capacity range is 25~ 5000mL, with stepless speed regulation and constant speed control functions, built-in soft start and overload protection, and supports long-term continuous operation.
Rotation speed up to 12,000 rpm, driven by vertical single-phase series motor, Power 200W, compact size and low power consumption, can be split, crushed and blended to meet the requirements of aseptic operation.
Adopting three-roll extrusion friction grinding principle, Rotation speed 28-152rpm adjustable, fineness of grinding up to 15μm, Hardness HS70 ° above the surface of cold hard alloy steel roller, support water chilling down system, suitable for high viscosity material processing.
Sampling speed up to 1920HZ, accuracy level 0.5, support three units of automatic conversion and a variety of test mode, with data storage and qualified judgment function, suitable for high-speed Impact torque detection.
Sampling speed up to 1920Hz, equipped with three test modes and 99 sets of data storage, can automatically calculate statistical values and support upper and lower limit qualification judgment, suitable for high-speed Impact twist detection scenarios.
Driven by a series-excited micro high-speed motor, the processing viscosity reaches 5000cp, Speed range 300-23000rpm stepless speed regulation, built-in soft start and overload protection, support long-term continuous operation.
Rotation speed is displayed digitally on the electronic constant force speed control line, which adapts to different test requirements, and the processing viscosity is up to 15000mPa.s. High-speed shearing and high-frequency mechanical effects achieve high-efficiency Mixing & dispersing homogenization.
Adopt electronic constant force speed control circuit, digital direct display shaft Rotation speed, speed range 100~ 8000rpm, maximum processing viscosity 100000mPa.s, dispersion head generates swirl/spin tangential high line speed under high speed drive, through hydraulic shearing and high frequency mechanical effects to achieve efficient mixing, dispersion and homogenization.
Integrated ultrasonic vibration and high-speed shearing technology, maximum line speed of 47m/s, Processing capacity 2-10L, with Power continuous adjustment and automatic Frequency tracking function, suitable for high viscosity samples.
