Using 470nm wavelength and double-sided LED Illuminant irradiation, equipped with amber filter and 105 * 163mm glue cutting area, accurate fluorescence sample separation operation can be achieved.
Film Film thickness 22.9μm, Spreader width 30cm, wear-resistant stainless steel material, molding process, suitable for low viscosity glue and thermal glue experimental Spreader.
Using double-sided LED Illuminant and 400nm wavelength, equipped with amber filter, the glue cutting area is up to 105 * 163mm, which is convenient for accurate separation of fluorescently labeled nucleic acid protein samples.
Using 365nm wavelength double-sided LED Illuminant, equipped with amber filter, the glue cutting area is up to 105 * 163mm, which can clearly observe the fluorescence and accurately separate the target area.
The formed pRoduction process ensures that the film is uniform, the film thickness is 22.9μm, the application width is 300mm, which is suitable for low viscosity glue experiment, and the material is wear-resistant stainless steel to prolong the service life.
Support bar and drawdown blade two coating methods, application width 300mm, heating temperature up to 180 ℃, with intelligent program control function, can remotely set film paraMeters to ensure Spreader uniformity and accuracy control.
Four-station independent operation, speed accuracy +/- 1% and range 100-7000rpm, support 5-stage program control and 3000 seconds homogenizing time, equipped with HEPA efficient filtrate to achieve 99.99% purification rate.
Using 6061 aluminum alloy heating platform and stainless steel cover plate, support 10 sets of formulations with a total of 320 procedures, each section is up to 9999 minutes, with the function of breaking couple alarm and over-temperature deviation alarm, Temperature Stability +/- 1%.
Measurement range 0-100 ℃ accuracy +/- 0.1 ℃, viscosity range 20-2000000mPa · s, support multi-rotor switching and Rotation speed adjustment, repRoducibility up to +/- 1% F.S.
Equipped with 7-inch Touchscreen, easy to operate, support 0.1-200 rpm stepless speed regulation and rheological Linear dispersion display, Measurement accuracy of +/- 1% F. S, with Gigabit network port and U disk storage function.
Equipped with 7-inch Touchscreen and rheological Linear dispersion display function, support 0.1-200 rpm stepless speed regulation and +/- 1% Measurement accuracy, built-in temperature sensor for automatic viscosity conversion and fast data transmission.
Equipped with 7-inch Touchscreen, easy to operate, viscosity range 1~ 6 million mPa · s, support rheological characteristic measurement and continuous viscosity display, with temperature sensor and gigabit network port transmission function.
Equipped with 7-inch Touchscreen, easy to operate, support stepless speed measurement and viscosity automatic conversion, measurement range 1~ 75000000mPa.s, gigabit network port to ensure fast and reliable data transmission.
Using slot-die coating method, application width ≤ 500mm, thickness range 10-250μm; equipped with automatic deviation correction and constant tension system, Oven temperature RT +~ 160 ℃, support segmented thermostatic, ensure Spreader accuracy +/- 3 microns.
With 0.001 pH Measurement accuracy and -5.0~ 110.0 ℃ Temperature Measurement range, support intelligent endpoint determination and 500 sets of Data storage, in line with GLP standards to achieve data traceability.
