Equipped with 200 +/- 0.2g Koenig pendulum and 500g platinum saz pendulum two configurations, the swing period is 1.4 +/- 0.02s and 1 +/- 0.001S, through the photoelectric system automatic measurement of film damping time, to meet the different standards of test requirements.
Adopt stainless steel pendulum tube to achieve +/- 180 degree swing, equipped with 25 0.4mm nozzles, flow adjustment range 100-1000L/h, support sample holder 1-4 rpm adjustable speed, test water can be recycled.
Adopting Koenig pendulum structure, the total mass is 200 +/- 0.2g, and the swing period is 1.4 +/- 0.02s. The coating Hardness is accurately measured by the swing attenuation time, and the number of swing angles is automatically recorded.
Using the electromagnet cissing pendulum, it can measure the thickness of the test plate from 0.1mm to 5.5mm, and is equipped with two laser Probes to record data. The swing period is 0.625s.
Support Koenig and Persaz double pendulum automatic switching, steel ball diaMeter 5mm and 8mm, with electromagnetic release and electronic counting mechanism to ensure that the test is accurate and not affected by the environment.
Using electromagnet cissing pendulum, equipped with two laser Probe to record data, the thickness range can be measured 0.1-5 mm, the organic Glass door cover reduces the influence of airflow, and the swing period is 1 second.
Using electromagnet cissing pendulum, equipped with two laser Probe recording data, can test 0.1mm to 5.5mm thickness test plate, swing period 1.4s, Organic Glass door cover to reduce the impact of airflow.
Using reciprocating friction method, friction load 500g, Friction Frequency 40 +/- 2 times/minute, can simulate drying or wet conditions for material wear-resistant decolorization test.
Can simultaneously detect dynamic and static Coefficient of Friction, force range 0~ 5N, accuracy level 1, support microcomputer control and micro printer output test report.
Using microcomputer control to achieve automatic testing, equipped with High Accuracy force sensor accuracy of 0.001N, special drive system running smoothly, can simultaneously measure static friction and dynamic Coefficient of Friction.
The photoelectric counter is used to realize automatic counting, and the measurement is fast and accurate; the period of M-3 swing Rod is 0.625s, and the swing time on standard Glass is 440 +/- 6s; the horizontal mechanism is improved, and the scale can be moved horizontally to facilitate zero adjustment.
The grinding head reciprocates within 110mm Travel, and the Friction Frequency is adjustable from 20 to 60cpm. It cooperates with 1000g weight to test Abrasion Resistance under different pressures, and the digital display counter directly displays the number of frictions.
Based on the national standard design, the static Coefficient of Friction and the dynamic Coefficient of Friction can be measured simultaneously, with a test accuracy of up to 0.001N, equipped with High Accuracy Sensor and special drive system to ensure smooth operation and accurate results.
Using stopwatch counting method, the length of the swing Rod is 500 +/- 1mm, and the total mass of the swing is 120 +/- 1g. The resistance to deformation is evaluated by measuring the ratio of the swing amplitude time on the film to the swing time on the Glass.
Equipped with 200 +/- 0.2g and 500 +/- 0.1g two swing bars, can measure the film damping time, reflect the surface Hardness through swing attenuation, support different standard test requirements.
