Suitable for high voltage molding sand test, compression stroke 2.50mm, load 1500g, with average calculation and MAX Maximum latch function, support USB and Bluetooth data communication.
Using high frequency principle, Measurement range 0-99.9%, resolution 0.1/0, Response Time 1 second, probe type Sensor can penetrate deep into the material internal measurement, backlight LCD display clear and low consumption.
Using 1400rpm speed regulation and 1.5 liters effective volume sand grinding basket, rapid dispersion and grinding are achieved through tensile shear and Impact between sand and material, and the operation is simple.
Suitable for manual or mechanical low and medium pressure molding of fine sand core testing, compression stroke 2.50mm, load 980g, with average calculation and MAX Maximum latch function, support data output communication.
Compression stroke 2.50mm, load 237g, suitable for wet mold sand/core surface Hardness measurement, support USB and Bluetooth data output, with average calculation and undervoltage alarm function.
Set dispersion and sand grinding functions in one, complete two processes in a single container, speed range 130~ 3000rpm, grinding basket size Φ 80x60mm, high efficiency and easy to clean.
The extrusion molding process is used to ensure continuous wire, the film thickness is precisely controlled by 20μm, the application width is 250mm to meet various needs, and the 304 stainless steel material is durable and easy to clean.
Adopt integrated injection molding measurement frame and transparent water Tank, anti-corrosion and drop resistance; density readability 0.001g/cm ³, Capacity 300g; support a variety of liquid media, rapid testing suitable for field applications.
The variable frequency motor is used to achieve stepless speed regulation from 0 to 7500 rpm, equipped with dispersed impeller and sand grinding blades, and the dual-axis constant force lifting system has a stroke of 200mm, which can adapt to different experimental requirements and calculate the material reaction relationship.
Adopt frequency conversion motor to achieve stepless speed regulation of 60-8000rpm, equipped with dual-axis constant force lifting system and sand grinding blade disc, with digital display Rotation speed and timing function, lifting Travel up to 250mm.
1400 rpm high-speed stirring is used to achieve strong tensile shear and Impact between the material and the sand, and the fineness of grinding can reach 25 microns or less, suitable for sample testing, with a capacity of 1.5 liters.
Using dual-axis constant force lifting system and variable frequency motor, 0-3000rpm stepless speed regulation, equipped with dispersed impeller and sand grinding blades, can directly calculate the relationship between material viscosity and reaction rate.
Rotation speed control is accurate and synchronization performance is good; the height of the casting roller can be adjusted to adapt to different solution strength materials; the surface finish of the hard chrome-plated mirror roller is high, and it is equipped with a circulating water chilling down system. Temperature control accuracy +/- 1 ℃.
Using halogen lamp heating source, moisture temperature accuracy +/- 0.5%, moisture readability 0.02%~ 0.1%, heating temperature range 50 ℃ to 180 ℃, support timing automatic end measurement, with RS232 communication interface.
1400 rpm high-speed stirring is used to achieve strong tensile shear and Impact between the material and the sand, the fineness of grinding can reach 25 microns or less, and the capacity is 1.5 liters, which is suitable for laboratory sample dispersion grinding.
