CATEGORIES

    Electric Heating High-Temperature Air Blowing Drying Oven

    Overview Products Knowledge Standards Terms
    The electric high-temperature forced air drying oven heats air through electric heating tubes, and the fan circulates the hot air inside the chamber to uniformly heat and dehydrate the samples. It is used for drying and curing materials such as plastics and coatings in the laboratory, with a temperature range typically between 50℃ and 300℃.
    Selection
    When selecting, confirm the required temperature range and chamber size, observe the thickness and sealing of the insulation layer, check the type of fan and the material of the heating tube, pay attention to temperature control accuracy and overheating protection function, and verify that the power supply voltage matches the device's power consumption.
    Style
    Product Type
    Principle
    Airflow Direction
    Temp Range
    temperature resolution
    volume
    Heater Type
    Chamber Material
    Temp Fluctuation
    Temp Uniformity
    Safety Protection

    Terms

    Air Exchange Aging Test Chamber
    Hot Air Aging Test Chamber
    Electric Thermostatic Water Bath
    Tubular Vacuum Atmosphere Furnace
    Temperature Indicating Paper
    High and low temperature test chamber
    Heating muffle furnace
    Thermoelectric Refrigeration Constant Temperature Bath
    Muffle furnace
    Stirring Constant Temperature Oil Bath

    Standards

    Active GB/T 43092-2023
    Electrochemical performance test of lithium ion battery cathode materials—Test method for high temperature performance
    Active GB/T 3780.30-2023
    Carbon black—Part 30：Determination of high temperature volatile matter—Thermogravimetry method
    Active GB/T 36264-2018
    Test method for tensile strength of fiber composites under ultrahigh temperature and oxidizing environment
    Active GB/T 37783-2019
    Metallic materials—High strain rate tensile test method at elevated temperature
    Active GB/T 38515-2020
    The method for high temperature mechanical properties of quartz fabric-reinforced resin matrix composite materials
    Active GB/T 5137.3-2020
    Test methods of safety glazing materials used on road vehicles—Part 3:Radiation,high temperature,humidity,fire and simulated weathering resistance tests
    Active GB/T 38924.3-2020
    Environmental test methods for civil small and light unmanned aircraft system—Part 3: High-temperature test
    Active GB/T 12085.23-2022
    Optics and photonics—Environmental test methods—Part 23：Low pressure combined with cold,ambient temperature and dry or damp heat
    Active GB/T 12085.22-2022
    Optics and photonics—Environmental test methods—Part 22：Combined cold,dry heat or temperature change with bump or random vibration
    Active GB/T 12085.2-2022
    Optics and photonics— Environmental test methods—Part 2: Cold, heat and humidity
    Active GB/T 42900-2023
    Metallic materials—High strain rate compression test method at elevated temperature
    Active GB/T 4937.23-2023
    Semiconductor devices—Mechanical and climatic test methods—Part 23:High temperature operating life
    Active GB/T 34220-2017
    Refractory Products—Determination of tensile strength at elevated temperature
    Active GB/T 34218-2025
    Refractory products—Determination of compressive strength at elevated temperatures
    Active GB/T 2423.102-2008
    Environmental testing for electric and electronic products - Part 2: Test methods - Test: combined temperature(cold and heat)/low air pressure/vibration（sinusoidal）

    Instruments

    BENTING CBGL-140B Electric Blast Drying Oven vertical double air duct temperature control RT + 10~ 300 ℃
    BENTING CBGL-140B Electric Blast Drying Oven vertical double air duct temperature control RT + 10~ 300 ℃

    Vertical double air duct vertical hot air circulation to ensure temperature uniformity, temperature control accuracy +/- 1.0 ℃, turbine centrifugal fan blades with the bottom drum design, switch fan adjustable to prevent blowing powder items.

    $ 912.00
    Kenton KH-100C digital display industrial air Drying Oven intelligent PID temperature control high power air
    Kenton KH-100C digital display industrial air Drying Oven intelligent PID temperature control high power air

    Large diaMeter centrifugal wind wheel and optimized air supply circulation duct, heat flow evenly, Temperature Fluctuation +/- 2%, Temperature range RT + 5~ 250 ℃, can work continuously for a long time, high stoving efficiency.

    $ 762.00
    AISRY ASR-GW225L high temperature test chamber digital with timing hot air circulation system
    AISRY ASR-GW225L high temperature test chamber digital with timing hot air circulation system

    The digital display temperature control is accurate and reliable, the hot air circulation system is composed of a high temperature fan and a suitable air duct to improve the Temperature uniformity in the working room, and the heating wire is installed at the bottom to heat up quickly.

    $ 2171.00
    BENTING CBGL-420BT Electric Blast Drying Oven vertical double air duct vertical hot air circulation
    BENTING CBGL-420BT Electric Blast Drying Oven vertical double air duct vertical hot air circulation

    Adopt vertical double air duct vertical hot air circulation, temperature control accuracy +/- 1.0 ℃, Temperature resolution 0.1 ℃, with timing and over-temperature alarm function, turbine centrifugal fan blade with bottom drum and bottom heating to ensure Temperature uniformity.

    $ 1719.00
    Kenton KH-100A digital display industrial air Drying Oven intelligent PID temperature control high power motor
    Kenton KH-100A digital display industrial air Drying Oven intelligent PID temperature control high power motor

    Intelligent PID self-tuning temperature control, temperature Accuracy +/- 0.5 ℃, equipped with large diaMeter centrifugal wind turbine and high temperature heating tube, heat flow uniformity, can work efficiently for a long time, suitable for mass pRoduction environment.

    $ 833.00
    BENTING CBGLL-230BE Blast Drying Oven vertical double air duct hot air circulation 225L
    BENTING CBGLL-230BE Blast Drying Oven vertical double air duct hot air circulation 225L

    Vertical double air duct vertical hot air circulation to ensure temperature uniformity, speed control fan can adjust the air volume to avoid blowing powder items, Temperature range RT + 10-300 ℃, studio volume 225L, equipped with independent temperature limit alarm system to ensure experimental safety.

    $ 1474.00
    YIHENG DHG-9145A Drying Oven Electric Blast Drying Oven smart multi-stage programmable
    YIHENG DHG-9145A Drying Oven Electric Blast Drying Oven smart multi-stage programmable

    Microcomputer P.I.D temperature controller, temperature control accuracy +/- 1.0 ℃, volume 136L, with hot air circulation system to improve Temperature Uniformity, support independent temperature limit alarm and optional programming function.

    $ 749.00
    RONGHUA INSTRUMENT DHG-9101-0A Electric thermostatic blast Drying Oven Stainless steel liner 350 × 350 × 350mm
    RONGHUA INSTRUMENT DHG-9101-0A Electric thermostatic blast Drying Oven Stainless steel liner 350 × 350 × 350mm

    Temperature range RT + 10~ 300 ℃, Temperature Fluctuation +/- 1 ℃, stainless steel liner corrosion resistance, electric heating tube heating fast and uniform, intelligent digital display easy to operate.

    $ 403.00
    SANFA DHG-9030 electric thermostatic blast Drying Oven 30L volume temperature fluctuation +/- 1 ℃
    SANFA DHG-9030 electric thermostatic blast Drying Oven 30L volume temperature fluctuation +/- 1 ℃

    Adopt hot air circulation system to ensure Temperature Uniformity +/- 2 ℃, support 1-9999 minutes timing control, with RS-485 communication interface optional, suitable for drying and sterilizing operations.

    $ 333.00
    HUITAI HHG-9149A High temperature blast Drying Oven Microcomputer temperature control hot air circulation drying equipment
    HUITAI HHG-9149A High temperature blast Drying Oven Microcomputer temperature control hot air circulation drying equipment

    Temperature range up to 500 ℃ and Fluctuation only +/- 1 ℃, equipped with hot air circulation system to ensure Temperature uniformity, support independent temperature limit alarm and RS485 Communication interface to meet the precise temperature control requirements in high temperature environment.

    $ 1637.00
    Kenton KH-35A digital display Electric Blast Drying Oven independent temperature limiter microcomputer PID temperature control
    Kenton KH-35A digital display Electric Blast Drying Oven independent temperature limiter microcomputer PID temperature control

    Microcomputer intelligent PID control technology to ensure temperature Accuracy +/- 0.5 ℃, the external hot air circulation system makes the indoor temperature stable, high temperature silicone sealing door edge and high temperature heating tube to ensure safety and durability.

    $ 323.00
    Kenton KH-55A digital display Electric Blast Drying Oven independent temperature limiter microcomputer PID temperature control
    Kenton KH-55A digital display Electric Blast Drying Oven independent temperature limiter microcomputer PID temperature control

    Microcomputer intelligent PID control technology ensures temperature Accuracy +/- 0.5 ℃, external hot air circulation system stabilizes studio temperature, high temperature silicone sealing and high temperature heating tube enhance safety and service life.

    $ 394.00
    BENTING BGLZ-125BE gravity convection Drying Oven 5 inch Touchscreen program temperature control
    BENTING BGLZ-125BE gravity convection Drying Oven 5 inch Touchscreen program temperature control

    Vertical double air duct vertical hot air circulation to ensure Temperature uniformity, temperature control accuracy +/- 1.0 ℃, switch fan can avoid blowing powder items, equipped with Touchscreen support program temperature control and data recording function.

    $ 1687.00
    DHG-9240B vertical blast Drying Oven stainless steel liner double circulation air duct
    DHG-9240B vertical blast Drying Oven stainless steel liner double circulation air duct

    Adopt double circulation air duct system and stainless steel heating pipe, Temperature uniformity up to +/- 1 ℃, temperature control accuracy 0.1 ℃. Studio shelf adjustable, sealing structure resistant to high temperature aging, insulation layer thickness over 70mm to reduce heat loss.

    $ 659.00
    Kenton KH-35T digital display Electric Blast Drying Oven independent temperature limiter microcomputer PID control
    Kenton KH-35T digital display Electric Blast Drying Oven independent temperature limiter microcomputer PID control

    Adopt microcomputer intelligent PID control technology, Temperature Fluctuation +/- 1%, Accuracy +/- 0.5 ℃. External hot air circulation system ensures temperature stability, high temperature silicone sealing door edge and high temperature heating tube ensure safety and durability.

    $ 632.00

    Articles

    Application of High-Temperature Viscometer in Testing the Melt Viscosity Characteristics of Hot Melt Ink
    This article introduces a method for testing the melt viscosity of hot-melt ink using a high-temperature viscometer. The test employs a rotational viscometer to measure the viscosity of three ink samples at different temperatures.
    Application of High-Temperature Universal Testing Machine in the Study of Hot Modulus of Rupture of Refractory Materials
    This article introduces the application of a high-temperature universal testing machine in measuring the hot modulus of rupture of refractory materials. It explains the working principle, testing procedure, and key parameters of the testing machine, such as the effects of heating rate, holding time, and loading rate.
    How is a high-temperature muffle furnace applied in ash determination?
    This article introduces the application of high-temperature muffle furnaces in ash determination. The principle of ash determination involves completely burning the sample at high temperatures, leaving behind inorganic mineral residues. The muffle furnace provides a stable and controllable thermal environment, ensuring accurate results.
    Ultrasonic Thickness Gauge Selection: Technical Considerations for Probe Configuration and Measurement Modes
    This article primarily introduces the technical factors to consider when selecting an ultrasonic thickness gauge. In terms of probe configuration, the frequency affects both resolution and penetration depth, while crystal size determines adaptability to curvature and surface conditions. Dual-element probes offer a smaller dead zone compared to single-element probes, and delay-line probes are suitable for thin-wall and high-temperature applications.
    Application of Three-Chamber High and Low Temperature Test Chambers in Rapid Temperature Cycling for Electronic Products
    The three-chamber high-low temperature test chamber is used for reliability testing of electronic products, enabling rapid temperature transitions through independent high temperature, low temperature, and test zones. Compared to traditional single-chamber equipment, it reduces temperature change time and enhances testing efficiency.
    Temperature Oscillation Suppression in Reflux Synthesis Using Laboratory Stirring Heating Mantles
    This article explores the causes and suppression methods of temperature oscillations in laboratory heating mantles during reflux synthesis.
    High-temperature viscometer evaluates the flow characteristics of ceramic coatings before sintering.
    This article introduces how to use a high-temperature viscometer to evaluate the flow characteristics of ceramic coatings before sintering. During measurement, the instrument detects changes in the viscosity of the coating sample under simulated sintering temperature conditions using rotational or oscillatory principles.
    High-temperature viscometer measures the flow behavior of powder coatings in the molten state.
    This article introduces the use of a high-temperature viscometer to measure the flow behavior of powder coatings in their molten state. Powder coatings need to melt and flow before curing, a process that directly affects the smoothness and performance of the coating.
    Temperature uniformity of high-temperature aging test chamber for UV resistance testing of inks
    This article discusses how the temperature uniformity of high-temperature aging test chambers affects the accuracy of ink UV resistance testing. Temperature uniformity refers to the deviation in temperature at various points inside the chamber, with smaller deviations leading to more reliable test results.
    High-temperature aging test chamber accelerates life testing of electronic components.
    The high-temperature aging test chamber accelerates the physical and chemical changes within electronic components by simulating high-temperature environments, thereby predicting their long-term performance and failure modes.
    Thermal shock test chamber measures the thermal shock resistance of polymer films.
    This article introduces how to test the thermal shock resistance of polymer films using a thermal shock test chamber. The test involves rapidly switching the film between high and low temperatures to simulate the drastic temperature changes that may occur in actual use, thereby generating thermal stress within the material.
    Hot air aging oven measures the long-term thermal-oxygen life of engineering plastics.
    This article introduces how to use a hot air aging oven to test the long-term thermal-oxidative lifespan of engineering plastics. The test is based on the Arrhenius equation, which accelerates material aging at high temperatures to simulate performance changes under actual usage conditions.
    Melt flow index tester measures the processing fluidity of high-temperature engineering plastics.
    This article introduces how a melt flow indexer measures the processing fluidity of high-temperature engineering plastics. It first explains the working principle of the instrument, which involves measuring the rate at which molten plastic passes through a standard die under specific temperature and pressure conditions to obtain the melt flow rate value.
    High-temperature aging chamber for testing thermal-oxidative aging of plastic films.
    This article introduces the method of testing the thermo-oxidative aging of plastic films using a high-temperature aging chamber. Thermo-oxidative aging refers to the chemical changes that occur in plastics under high temperature and oxygen exposure, leading to a decline in performance.
    Humidity and heat test chamber tests the moisture absorption rate of resin under high temperature and high humidity conditions.
    This article introduces the method of using a hygrothermal test chamber to measure the moisture absorption rate of resin under high temperature and high humidity conditions.