Impact specimens with semi-spherical punches are used for energy consumption measurement to evaluate anti-Impact performance. Impact energy range is 3J, Impact speed is 2.5m/s, and it is suitable for a variety of film and paper tests.
Equipped with 200 +/- 0.2g Koenig pendulum and 500g platinum saz pendulum two configurations, the swing period is 1.4 +/- 0.02s and 1 +/- 0.001S, through the photoelectric system automatic measurement of film damping time, to meet the different standards of test requirements.
Using electromagnet cissing pendulum, equipped with two laser Probe recording data, can test 0.1mm to 5.5mm thickness test plate, swing period 1.4s, Organic Glass door cover to reduce the impact of airflow.
Adopting Koenig pendulum structure, the total mass is 200 +/- 0.2g, and the swing period is 1.4 +/- 0.02s. The coating Hardness is accurately measured by the swing attenuation time, and the number of swing angles is automatically recorded.
Using the electromagnet cissing pendulum, it can measure the thickness of the test plate from 0.1mm to 5.5mm, and is equipped with two laser Probes to record data. The swing period is 0.625s.
The impact speed is 3.5m/s, the impact energy can be selected from 1J, 2.75J, 5.5J, and the pendulum lift angle is 150 °. It supports a variety of non-metallic material impact tests and is easy to operate.
Support Koenig and Persaz double pendulum automatic switching, steel ball diaMeter 5mm and 8mm, with electromagnetic release and electronic counting mechanism to ensure that the test is accurate and not affected by the environment.
Using electromagnet cissing pendulum, equipped with two laser Probe to record data, the thickness range can be measured 0.1-5 mm, the organic Glass door cover reduces the influence of airflow, and the swing period is 1 second.
High Accuracy swirl/spin encoder is used to collect the pendulum angle and speed, the angle resolution reaches 0.075 °, the wind resistance error is automatically corrected, the Impact speed is 2.9m/s, the pendulum energy can be selected from 2J to 5J, and the intelligent control automatically calculates the results and saves the test data for many times.
With tracking pointer and peak pointer double pointer design, pressing needle Travel 0-2.5 mm, Measurement range 10-90Hc, suitable for material testing with pressure above 0.049MPa when the compression rate is 50%, and can be matched with test bracket to improve Stability.
Using stopwatch counting method, the length of the swing Rod is 500 +/- 1mm, and the total mass of the swing is 120 +/- 1g. The resistance to deformation is evaluated by measuring the ratio of the swing amplitude time on the film to the swing time on the Glass.
Equipped with 200 +/- 0.2g and 500 +/- 0.1g two swing bars, can measure the film damping time, reflect the surface Hardness through swing attenuation, support different standard test requirements.
Microcomputer technology is used to automatically correct friction and wind resistance energy loss, swirl/spin encoder has high angle measurement accuracy, and displays paraMeters such as thrust energy and impact strength. Impact speed is 2.9m/s, and pendulum energy is 0.5J to 5J optional.
Impact height 120 cm, drop weight mass 1000g, punch diaMeter Φ 16mm, Impact depth 2.5mm, no secondary rebound phenomenon, to ensure the accuracy of the test.
High Accuracy swirl/spin encoder is used to collect angle and speed information, the angle resolution reaches 0.075 °, the wind resistance error is automatically corrected, the Impact speed is 3.8m/s, the pendulum energy can be selected from 7.5J to 50J, and the automatic calculation result is intelligently controlled.
