Supports iron-based and non-iron-based material measurement with accuracy of +/- 1~ 3% or +/- 2.5 µm, provides split Probe for enhanced maneuverability, automatically recognizes matrix materials and remembers calibrated values.
With iron-based and non-iron-based dual-use function, resolution up to 0.1um, test range 0~ 1250um, support single and continuous measurement, automatic identification of matrix material, stable and portable operation.
Using magnetic Induction and eddy Current dual principle, Measurement range 0~ 1250μm, Probe with line can measure grooves and complex positions, automatically identify iron and non-iron substrates, with single point and two point Adjustment.
Measurement range 0-999 ppb with accuracy +/- 20 ppb +/- 5% for rapid iron concentration detection.
The punch is pushed to the test plate at a constant speed of 0.2 +/-0.1mm/s, and the thickness range of the test plate is 0.30-1. 25mm, which can detect the degree of coating cracking and is suitable for testing of various materials.
Dedicated to Coating thickness Gauge calibrating, ensure accurate thickness measurement, suitable for F type equipment, improve Reliability.
Shear rate 7.5N, sample volume only 0.5ml, suitable for NTV-CAP1 host, suitable for small sample viscosity measurement.
Adopt PID temperature control system, temperature control accuracy of 0.5 ℃, heating evenly and quickly; heating plate size 250 * 400mm, anti-corrosion and easy to clean, support a variety of timing modes and alarm functions to ensure safe and reliable operation.
With low temperature OLED display, it can still work normally in -40 ℃ environment; equipped with iron-aluminum dual-use Probe, automatically identify the substrate and convert the mode; Measurement speed is as fast as 0.5 seconds, error range +/- 3%.
Using magnetic Induction and eddy Current dual principle, Measurement range 0-1250μm, support split probe flexible replacement, with automatic identification of matrix material function, minimum measurable surface radius 1.5mm.
Wire-wound molding process, wet film thickness of 80 microns, effective application width of 25.5 cm, can be used at the same time Spreader a variety of Coating comparative experiments, with Drawdown Plate use effect is better.
The shear rate is 13.3N, the sample volume is only 67 μL, the applicable viscosity range is 20~ 37500mPa · s, and the accuracy is +/- 2% F. S, which is suitable for a variety of fluid tests.
The shear rate is 2.0N, the sample volume is only 400 μL, the applicable viscosity range is 125~ 250000mPa · s, and the accuracy is +/- 2% F. S, which is suitable for a variety of fluid tests.
Shear rate 3.84N, sample volume 0.5ml, suitable for NTV-CAP1 host, suitable for a variety of viscosity range measurement.
Measurement range 0.00-5 mg/L, Color intensity is proportional to concentration, providing 100 tests, suitable for the analysis of iron content in various liquid samples.
