With two test stations, the load range is 50~ 1000g, and three typical wear resistance tests of alcohol, eraser and pencil can be carried out, which is suitable for wear resistance evaluation of various coatings and materials.
Can set the moving distance 0.5-4 inches, speed 2-60 back and forth/minute and load 350-2100g, support a variety of abrasion media, stable and accurate testing, in line with a number of international standards.
Rotation speed is stable with stepper motor drive, working wheel Rotation speed 60/70rpm adjustable, equipped with different specifications abrasive wheels and turntable components, support multi-material wear test, avoid friction directional defects.
Speed range 0-70rpm, equipped with a variety of load options and abrasive wheels of different materials to meet diverse testing needs, simple operation and stable performance.
Adopt 914mm pipe and 19mm inner diaMeter design, 45 degree test plate angle to ensure accurate impact of sand flow, adjustable height structure to meet different test needs
Double abrasive wheels X-shaped friction track, friction non-directivity closer to the actual working conditions, working wheel Rotation speed 60rpm +/- 2rpm, friction load optional 500g to 1000g, equipped with automatic counting and grinding function.
Double abrasive wheels swirl/spin friction design, adjustable friction load 500g to 1000g, working wheel Rotation speed 60rpm, to achieve non-directional abrasion, closer to the actual use of the scene.
The instrument is equipped with an eight-station synchronous test function, which supports 24mm and 60.5mm Li ShaRu motion trajectories, with a maximum motion range of 60.5mm. It meets a variety of standard requirements, is easy to operate, and counts intuitively.
Equipped with an electronic display 6-bit counter to realize automatic shutdown, the test disc Rotation speed is adjustable from 0-70, and supports multiple types of abrasive wheels and loads of 250g to 1000g to meet the testing requirements of different material standards.
Rotation speed is stable with stepper motor drive, working wheel Rotation speed 60/70rpm adjustable, supports two test configurations of paint film and wood, and the friction track is mesh to avoid directional defects.
Rotation speed 40rpm and roller diaMeter 150mm design, suitable for a variety of resilience material testing, abrasion Travel 40mm, test load optional 5N or 1N, to ensure efficient and accurate wear performance evaluation.
Double station design can simultaneously carry out two sets of tests, round trip 0-50mm adjustable, test load 80-990g adjustable range, equipped with a variety of weight to meet the wear resistance performance evaluation requirements under different load conditions.
With no-segment adjustable Friction Frequency, speed range of 60 times/minute, support 10-50mm friction distance free adjustment, mirror stainless steel material, provide a variety of clamping and wear mode, power failure memory function to ensure test continuity.
Precise load of 500g ensures test Stability and is suitable for calibrating and testing Wear resistance Testers to improve equipment performance.
The equipment is equipped with eight independent stations for simultaneous testing, supporting 24mm and 60.5mm Li Sharu motion trajectories, with a maximum motion range of 60.5mm. It uses a 395g fabric weight and a 2385g pressure clock system to achieve multi-standard material wear resistance evaluation.
