Using stain removal rate evaluation method, scruf speed 37cpm, load 1000g, can accurately adjust the liquid Flow rate, by measuring the reflection coefficient changes to evaluate the stain resistance of coatings.
The equipment is designed according to the international coating stain resistance experimental method, the water Tank volume is 5L, the inner diaMeter of the flow pipe is 8mm, and the time control range is 0~ 99h99s. It is suitable for the stain resistance test of building exterior coatings.
Double grinding head assembly configuration, total weight 1500g, Reciprocating Frequency 37 +/- 2 times/min, Travel 300mm, can accurately evaluate the stain resistance of the film.
The equipment has a 15-liter large-capacity water Tank and an 8mm inner diaMeter water pipe, supports 0 to 99 hours of time control, adopts stainless steel structure and automatic control device, and is suitable for coating stain resistance testing.
Adopt stainless steel water Tank structure, equipped with 8mm inner diaMeter flow pipe, support 0-99 hours time control, can realize automatic flushing and multi-directional test of sample.
High Accuracy Time Controller and Solenoid Valve are used to automatically control the flushing time. The water Tank and pipe fittings are made of stainless steel, resistant to corrosion, small in size and light in weight, easy to install and operate, and the time control range is 0-100 hours.
Smooth matte surface does not contain plasticizer, reflectance < 4%, thickness 0.25 +/- 0.02mm, to ensure test data Repeatability and comparability, in line with national standards.
Double station design can simultaneously carry out two sets of tests, round trip 0-50mm adjustable, test load 80-990g adjustable range, equipped with a variety of weight to meet the wear resistance performance evaluation requirements under different load conditions.
The device places the test plate in parallel in the wind tunnel, the wind speed control accuracy is 3 +/- 0.3m/s, the drying time is automatically controlled, and the surface crazing can be visually inspected, which is suitable for the evaluation of coating anti-crack performance.
With two test stations, the load range is 50~ 1000g, and three typical wear resistance tests of alcohol, eraser and pencil can be carried out, which is suitable for wear resistance evaluation of various coatings and materials.
Can test inks multi-directional adhesion at the same time, Friction Frequency 43cpm, Friction Load 2lb/4lb, Abrasion Resistance evaluation by measurement density or Coating thickness reduction, support 0-99999 automatic shutdown.
Scruf Travel 20-300mm adjustable, speed range 1-60cpm, equipped with TFT full color display and intelligent Operating interface, supports manual testing and is compatible with a variety of standard accessories, suitable for coating Abrasion Resistance evaluation.
Travel 100mm, Frequency 100cpm, Friction load 1000 +/- 100g, Grinding head area 2cm ², suitable for coating solvent resistance evaluation, easy and reliable operation.
Adopt arc reciprocating motion mode, provide four adjustable speeds (21-106rpm) and 2lb/4lb friction load, support 0-999999 automatic shutdown tests, suitable for Abrasion Resistance evaluation.
The wiping stroke is 120mm, the wiping frequency is 100cpm, and the friction load is 1000g. The number and speed of wiping can be set, and the automatic stop function ensures the accuracy of the test.
