Adopt gear pair drive, hand-pressed operation, rated load 500N, Travel 70mm, the upper and lower height of the frame can be adjusted, Force Gauge has a positioning structure, suitable for batch testing.
Adopt gear pair transmission, hand-pressed operation, the height of the frame can be adjusted up and down, Force Gauge up and down movement is equipped with positioning structure, rated load 500N, Travel 70mm, suitable for batch testing.
Measured value 500N, suitable for sheet, block material push-pull and destructive force test, can be used with Force Gauge test stand.
Measured value up to 5000N, suitable for sheet and block material push-pull force and destructive force test, supporting the Force Gauge test bench.
Rated load 500N, rack and pinion drive, hand pressure operation is simple and stable, large foot design to ensure smooth measurement process, Travel 75mm, suitable for Force Gauge installation for tensile or plug force test.
Measured value 50000N, suitable for tape, leather, paper and other sheet or block material push-pull force and destructive force test, supporting the Force Gauge test bench.
Hydraulic automatic pull-off test, the pull-off speed is stable and controllable, the accuracy is +/- 1% full scale, equipped with pull-off kit size 10-50mm, built-in rechargeable battery and 200,000 Data storage.
Hand pressure type is easy to operate, the rack and pinion transmission is smooth, the digital display ruler can display the displacement and lock the Travel, the maximum test load is 500N, the measurement Travel is 200mm, and the base is stable and the fuselage is heavy.
Built-in Sensor to achieve 0.001N high resolution measurement, Indication Error less than +/- 0.5%, equipped with RS-232 interface can be connected to the computer to achieve Linear dispersion test, automatically calculate the average value of 10 sets of data and support sound and light alarm.
It can be used with Force Gauge for vertical and horizontal testing, suitable for accurate measurement of thrust or tension, stable structure and easy operation.
With 0.01N high resolution, built-in Sensor to ensure Measurement accuracy, support 10 groups of Data storage and automatic average calculation, equipped with RS-232 interface to achieve Linear dispersion test and machine linkage control.
Measurement range 0~ 10mm, accuracy ≤ 0.02mm, probe center to the maximum measurement depth 130mm, Dial reading, portable handheld design, suitable for on-site rapid detection.
Measurement range 0-10mm, accuracy ≤ 0.02mm, Graduation 0.001mm, probe diaMeter Φ 20mm plane, portable handheld design, in line with chemical industry standards.
The device accuracy of +/- 0.5%, resolution 0.001N, with 10 data storage and automatic calculation of the average function, support sound and light alarm and backlight display, can be connected to the computer through the RS-232C interface to achieve Linear dispersion test.
Using S-type Sensor structure, Measurement range 10% -100% FS, Indication Error less than +/- 0.5%, with peak hold, automatic alarm and Data storage functions, support Linear dispersion test and machine linkage control.
