The rectangular studio has a large effective volume, Vacuum Level is less than 133Pa, Temperature range is + 15 ℃ to 200 ℃, High Accuracy Platinum Resistance Sensor and Tempered Bulletproof Double-decked Glass Observation Window are used.
The equipment operates under vacuum or pressure conditions, with a processing viscosity of 10000MPas, Operating temperature of 170 ° C, equipped with anchor type screw scraping wall stirring slurry and high shear homogeneous Mulser, supporting Multi-ParaMeter measurement such as material temperature and pressure.
The rectangular vacuum Chamber improves space utilization, Vacuum Level up to 133Pa, is equipped with double-decked tempered Glass doors for easy observation, supports program control of heating and vacuum holding time, and improves processing conformity.
The rotational speed range is 200-11000rpm, the processing capacity is up to 40L, and the precision-matched stator structure is used to achieve high-efficiency shear emulsification, which is suitable for the dispersion of various viscosity liquids and granular materials.
Speed range 2000~ 23000rpm, the maximum processing viscosity 1000MPa · s, the working head is made of stainless steel material to resist corrosion, the coupling is easy to connect and disassemble, and the stepless speed regulation is convenient and stable.
Speed range 2000~ 23000rpm, maximum processing viscosity 6000MPa · s, can run continuously for a long time, work head corrosion resistance, support stepless speed regulation and vacuum operation.
Speed range 2000-23000rpm, maximum processing viscosity 2000MPa · s, stepless speed regulation and LED display, work head all stainless steel material corrosion resistance, support continuous operation and a variety of work head replacement.
High Accuracy Platinum Resistance Sensor to achieve +/- 0.5 ℃ temperature fluctuations, Vacuum Level below 133Pa to ensure safe drying of thermosensitive substances, with over-temperature alarm and 9999 minutes timing function.
Driven by a series-excited high-speed motor, Speed range 0-11000rpm, rotor maximum linear speed of 19m/s, tens of thousands of shear tears per minute, processing viscosity up to 8000cp, to achieve efficient emulsification dispersion.
The effective volume utilization rate of rectangular vacuum Chamber is high, each layer can be independently heated and vacuumed to inject nitrogen without interfering with each other, the temperature control accuracy is +/- 1 ℃, the Vacuum Level is 133Pa, and the double-decked tempered Glass door is easy to observe.
The principle of vacuum adsorption is used to ensure that the substrate is flat, the high-quality aluminum alloy material is matched with 176 vacuum holes, the hole spacing is 18mm, and the oil-free Vacuumpump power is 150W to achieve efficient and environmentally friendly Moulding operation.
Stainless steel studio is durable and easy to clean, rectangular vacuum Chamber has high space utilization, Vacuum Level 133Pa, double-decked tempered Glass door is easy to observe, and over-temperature protection function improves safety.
The built-in vacuum pump realizes 0~ -80kPa Vacuum Level, the fully transparent vacuum Chamber can hold 12 samples, the program control supports 80 sets of paraMeter storage, and the vacuum cycle operation is automatically completed.
Double-decked independent heating and vacuuming do not interfere with each other, Vacuum Level up to 133Pa, rectangular vacuum Chamber improves space utilization, resilience silicone rubber door seal ensures high vacuum, over-temperature protection improves safety.
The rectangular studio design has a large effective volume, is equipped with a silicone rubber door seal to ensure Vacuum Level < 133Pa, tempered bulletproof double-decked Glass is easy to observe, and the temperature control accuracy is +/- 0.5 ° C suitable for heat-sensitive substances.
